Recommended Upper Mounting Bracket Inspection on the Output Transfer Gear for Certain 700 C-Series Articulated Trucks {3159}
- Articulated Truck
- 735C (S/N: TFJ1-205)
- 740C EJECTOR (S/N: TFN1-178)
- 745C (S/N: JE81-115; JE91-102; LFK1-676; TFK1-1084)
- 740C EJECTOR (S/N: TFN1-178)
Description Of Change: Inspection of the upper mounting bracket on the output transfer gear is now recommended for the products listed above. This Service Magazine outlines the recommended procedure for determining if the hardware should be replaced.
Adaptable To: The following inspection is adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
Parts List | ||
Qty | Qty | Part |
1 | 14(1) | 099-0169 Bolt |
2 | 14(1) | 198-4780 Hard Washer |
Show/hide table
(1) | Replace as required |
- Using a suitable torque wrench set to
200 N·m (148 lb ft) , perform a static torque inspection of 14 bolts (1). - Remove bolts (1) that turn at
200 N·m (148 lb ft) to clean and inspect the threads. - Replace damaged or missing hardware with bolts (1) and hard washers (2) as required.
- When installing bolts (1) and hard washers (2), use the dynamic torque value
240 ± 40 N·m (177 ± 30lb ft) .
Show/hide table
Illustration 1 | g06163224 |
Orientation view of the machine OTG upper mounting brackets (A) Output Transfer Gear (1) (2) |
Caterpillar Information System:
CB7 and CB8 Vibratory Asphalt Compactor Machine Systems Pump Control (Electronic Displacement Control) Neutral (Vibratory) - Test and Adjust - Split Drum
CS44B and CP44B Vibratory Soil Compactors Cooling System Coolant Sample (Level 2) - Obtain
CS44B and CP44B Vibratory Soil Compactors Cooling System Coolant Sample (Level 1) - Obtain
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) MID 161 - CID 3644 - FMI 9
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) MID 161 - CID 3643 - FMI 9
563D and 573D Wheel Feller Buncher Machine Systems Blower Motor - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks NOx Conversion Is Low
426F2 Backhoe Loader Engine Supplement Battery - Remove and Install
AP300F Asphalt Paver Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
CP44B and CS44B Vibratory Soil Compactor Machine Systems Fuel Tank - Remove and Install
422F2, 427F2, 428F2, 432F2 and 434F2 Backhoe Loaders Transmission (Standard Shift) Steering Lines
CB7 and CB8 Vibratory Asphalt Compactor Machine Systems Pump Control (Electronic Displacement Control) Neutral (Vibratory) - Test and Adjust - Solid Drum
994K Wheel Loader Engine Supplement Piston Motor (Hydraulic Fan) - Remove and Install
CB7 and CB8 Vibratory Asphalt Compactor Machine Systems Case Drain Flow for Piston Motor - Test and Adjust - Split Drum
2570D and 2670D Wheel Feller Buncher Machine Systems Air Conditioner - Remove and Install
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes Axle (Front)
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes Wheel and Tire (Front)
CS44B and CP44B Vibratory Soil Compactors Parking Brake Manual Release
416F2, 420F2 and 430F2 Backhoe Loaders Daily Inspection
CS44B and CP44B Vibratory Soil Compactors Specifications
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Magnetic Plug (Pump Drive, Hydraulic) - Check
426F2 Backhoe Loader Engine Supplement Electric Starting Motor - Remove and Install
AP355F Asphalt Paver Machine Systems Washdown Hose Reel - Remove and Install
Flexible Coupling Group Information has been Updated on Certain 794 AC, 795F AC, and MT4400D AC Off-Highway Trucks {4456} Flexible Coupling Group Information has been Updated on Certain 794 AC, 795F AC, and MT4400D AC Off-Highway Trucks {4456}