C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Water Lines

Usage:

826K 2L3


图 1g06144389

表 1
技术规格,适用于 383-2766  
项目  数量  零件  技术规格说明 
0T-0065 螺栓  拧紧至扭矩为 15 N·m (133 lb in)。 
8T-4983 软管卡箍  拧紧至扭矩为 6 N·m (53 lb in)。 
109-0077 O 形密封圈  在装配前,用 5P-3975 橡胶润滑剂稍微润滑孔。 

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
Marine Engine and Genset Control Panel IIIB DCU Panel Symptoms
Marine Engine and Genset Control Panel IIIB Remote Panel Symptoms
G3500H Generator Set Engine Inlet Air Is Restricted
C175 Tier 4 Final Engines for Off-Highway Trucks Self-Cleaning Oil Filter Operation
A New Engine Oil Pump Is Now Used for Certain C175-16 Marine Engines {1154, 1304} A New Engine Oil Pump Is Now Used for Certain C175-16 Marine Engines {1154, 1304}
Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490} Procedure to Convert the Marine Auxiliary Diesel Electric Power (DEP) C280-16 Engine to a Main Propulsion Conversion C280-16 Engine {1051, 1052, 108D, 1152, 1205, 1302, 1307, 1308, 1319, 1326, 1403, 1901, 7490}
Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490} Installation Procedure for the Pump Electronic Monitoring System for Well Stimulation Pumps {6002, 7490}
New Monitor Software Is Now Available for Certain Cat® Products {7620} New Monitor Software Is Now Available for Certain Cat® Products {7620}
NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091} NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091}
Marine Engine and Genset Control Panel IIIB Starting and Stopping
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C7.1 Engines and Generator Sets ARD Nozzle Heater - Test
G3500H Generator Set Engine Configuration Parameters
3512E and 3516E Marine Engines Turbocharger - Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Wiring Group
New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620} New Software Is Now Available For EMCP 4.1 and EMCP 4.2 Displays {7620}
Radiator Hose Leaks on Certain C1.5 and C2.2 Engines {1353} Radiator Hose Leaks on Certain C1.5 and C2.2 Engines {1353}
3512E and 3516E Marine Engines Aftercooler - Remove and Install
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment After Stopping Engine
SCR Retrofit Aftertreatment Product Storage
A New Exhaust Temperature Module Is Now Used on Certain 3512 and 3516 Engines {1901, 4490, 7451, 7490} A New Exhaust Temperature Module Is Now Used on Certain 3512 and 3516 Engines {1901, 4490, 7451, 7490}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.