C13, C15, and C18 Tier 4 Final Engines Caterpillar


Nitrogen Oxide Sensor

Usage:

826K 232


Illustration 1g06055231

Table 1
Specification for 359-9172 Nitrogen Oxide Sensor As 
Item  Qty  Part  Specification Description 
359-9172 Nitrogen Oxide Sensor As  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
Operating voltage is 16 V to 36 V.

Caterpillar Information System:

A New Prelube Pump Is Now Used on Certain 3500 Engines {1319} A New Prelube Pump Is Now Used on Certain 3500 Engines {1319}
G3500H Generator Set Engine Sensor Calibration Required - Test
C7.1 Marine Engine Valve Mechanism Cover - Remove and Install
Marine Engine and Genset Control Panel IIIB General Information
Filter Covers and Housings are Difficult to Remove on Certain Large off-Highway Trucks {3067, 5068} Filter Covers and Housings are Difficult to Remove on Certain Large off-Highway Trucks {3067, 5068}
C175 Oil&Gas Offshore Engine Air Inlet and Exhaust System Operation
C175 Oil&Gas Offshore Engine Sensor (Data Link Type) - Test
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Sensor Calibration Required - Test - In Cylinder Pressure Sensor
Improved Fan Drive Group Bolts are Now Used on Certain 784 and 785 Off-Highway Trucks {1359} Improved Fan Drive Group Bolts are Now Used on Certain 784 and 785 Off-Highway Trucks {1359}
C175 Tier 4 Final Engines for Off-Highway Trucks Backflow Valve - Test
C175 Oil&Gas Offshore Engine Cooling System Operation
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Speed - Check
Well Stimulation Pumps Monitoring System
New Engine Software in Now Used on Certain Commercial 3500 Series Engines {1920} New Engine Software in Now Used on Certain Commercial 3500 Series Engines {1920}
C7.1 Marine Engine Cylinder Head - Remove
C7.1 Engines and Generator Sets Aftertreatment Cooling Fan - Test
C7.1 Marine Engine Cylinder Head - Install
G3500H 50Hz Generator Sets Sensors and Electrical Components
G3500H Generator Set Engine Exhaust Temperature - Test
C7.1 Engines and Generator Sets Aftertreatment Identification Module - Test
A New Bearing Cage Assembly is Now Used in the Planetary Group on Certain Wheel Tractor-Scrapers and Off-Highway Trucks {3030, 3160} A New Bearing Cage Assembly is Now Used in the Planetary Group on Certain Wheel Tractor-Scrapers and Off-Highway Trucks {3030, 3160}
C7.1 Engines and Generator Sets ARD Fuel Supply - Test
The Large Painted on Arrow Used on Turbine Inlet Bellows on Certain C175 Engines Is Temporarily Being Removed {1059} The Large Painted on Arrow Used on Turbine Inlet Bellows on Certain C175 Engines Is Temporarily Being Removed {1059}
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.