Window Wiper and Wiper Motor
Show/hide table
Illustration 1 | g06130369 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 1 | 5C-7261 Nut | Use the following procedure to install the wiper arm: 1. Tighten the nut to 2. Wait for a minimum of 0.5 hours to a maximum of 4 hours. 3. Again, tighten the nut to |
2 | 1 | - | Use following torque to tighten the nut: 1. If mounted in glass, torque to 2. If mounted in steel, torque to |
3 | 1 | - | Use following torque to tighten: 1. If mounted in glass, tighten to 2. If mounted in steel, tighten to |
Caterpillar Information System:
990K Wheel Loader Systems Window Wiper and Wiper Motor
Procedure to Install Ventilation Reduction Package on R1600H Load Haul Dump Machines {1000, 7620} Procedure to Install Ventilation Reduction Package on R1600H Load Haul Dump Machines {1000, 7620}
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Filter Housing - Remove
Improved Pipe Assemblies for Coolant Tube are Now Used on Certain 794 AC Off-Highway Trucks {1380} Improved Pipe Assemblies for Coolant Tube are Now Used on Certain 794 AC Off-Highway Trucks {1380}
PM310, PM312, and PM313 Cold Planer Machine Interlocks
MD6200 Rotary Drill Fuel Tank Water and Sediment - Drain
Product Link ® Elite PLE742 Systems Wiring Harness (Short Circuit) - Test
Product Link ® Elite PLE742 Systems Wiring Harness (Open Circuit) - Test
Product Link ® Elite PLE742 Systems Electrical Connector - Inspect
Product Link ® Elite PLE742 Systems ECM - Replace
Product Link ® Elite PLE742 Systems Configuration File - Uninstall
Product Link ® Elite PLE742 Systems Configuration File - Install
980L Tier 3 Wheel Loader Machine System Control Valve (Auxiliary) - Remove and Install
New Electronic Monitoring System (EMS) Series III Is Now Available on Certain Machines Equipped with Cat® Product Link {7490, 7610, 7620} New Electronic Monitoring System (EMS) Series III Is Now Available on Certain Machines Equipped with Cat® Product Link {7490, 7610, 7620}
New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620} New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620}
980L Tier 3 Wheel Loader Engine Supplement Hood - Remove and Install - One Piece Hood
980L Tier 3 Wheel Loader Machine System Main Control Valve - Remove and Install
980L Tier 3 Wheel Loader Machine System Main Control Valve - Disassemble
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329} Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329}
980L Tier 3 Wheel Loader Machine System Main Control Valve - Assemble
New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301} New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301}
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Filter Housing - Install
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Right Hand