Differential and Bevel Gear
Show/hide table
Illustration 1 | g06229046 |
Show/hide table
Item | Qty | Part | Specification Description |
- | - | - | Use the following procedure to assemble cover:
1. Assemble cover and pin without shim pack. 2. Tighten bolts lightly to remove end play. 3. Measure maximum gap between cover and axle housing surface. 4. Select and install shim thickness to provide |
1 | 54 | 1D-4626 Bolt | Torque to Tighten bolts to an additional turn angle of 120 ± 10 degrees. |
2 | 1 | 6W-8401 Pin | Diameter is |
3 | 2 | 7D-4719 Spring | Length under test force is Test force is Free length is |
4 | - | - | Tighten bolts to |
Caterpillar Information System:
C7.1 Engines and Generator Sets ARD Fuel Pressure Is Low
992K Wheel Loader Systems Differential and Bevel Gear
980L Tier 3 Wheel Loader Engine Supplement Exhaust Manifold - Remove and Install
992K Wheel Loader Systems Brake Accumulator - Uncharged
312F and 313F Excavator Machine Systems Pilot Valve (Swing Parking Brake)
D5R and D6N Track-Type Tractor Engine Supplement Hood - Remove and Install
953K Track-Type Loader Machine Systems Power Train System
PL61 Pipelayer Engine Oil and Filter - Change
PL61 Pipelayer Engine Oil Sample - Obtain
PL61 Pipelayer Engine Oil Level - Check
D6T Track Type Tractor Power Train Main Drive Shaft - Remove and Install
Using a SATEL® Satelline-EASy UHF Radio Modem to Connect a Cat® AccuGrade Grade Control System or Cat® GRADE Machine to a Topcon® base station {7220, 7490} Using a SATEL® Satelline-EASy UHF Radio Modem to Connect a Cat® AccuGrade Grade Control System or Cat® GRADE Machine to a Topcon® base station {7220, 7490}
Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252} Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252}
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler S60-S70
A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252} A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252}
992K Wheel Loader Systems Brake Accumulator - Charged
C7.1 Engines and Generator Sets ARD Is Disabled
953K Track-Type Loader Machine Systems Brake System
Procedure to Install Tie-off Retrofit on Certain 990H, 990K Wheel Loaders and 844H, 844K Wheel Dozers {0679, 1122, 7323} Procedure to Install Tie-off Retrofit on Certain 990H, 990K Wheel Loaders and 844H, 844K Wheel Dozers {0679, 1122, 7323}
953K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
Track Link Assembly has been Discontinued on Certain D10 Track Type Tractors {4169, 4171} Track Link Assembly has been Discontinued on Certain D10 Track Type Tractors {4169, 4171}
953K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
953K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
525D, 535D, 545D and 555D Wheel Skidders C7.1 Engine Supplement Crankshaft Front Seal - Remove and Install