Differential and Bevel Gear
Show/hide table
Illustration 1 | g06127101 |
Show/hide table
Specification for 316-8324 Differential and Bevel Gear Gp and 316-8336 Differential and Bevel Gear Gp | |||
Item | Qty | Part | Specification Description |
- | Use the following procedure to assemble cover:
1. Assemble cover and pin without shim pack. Tighten bolts lightly to remove end play. Measure maximum gap between cover and axle housing surface. Select and install shim thickness to provide |
||
1 | 8 | 8C-7562 Flat Head Screw | Before assembly, apply green Loctite 620 retaining compound to lock threads and bond screw head to washer. |
2 | 2 | 358-9130 Washer | Clean and dry all contact surfaces with castrol kleen 3414 or equivalent.
Before assembly, apply green Loctite 620 retaining compound to contact surface. Finger tight and torque in X pattern |
3 | 54 | 1D-4626 Bolt | Torque to Tighten to an additional turn angle of 120 ± 10 degrees. |
4 | 1 | 6W-8401 Pin | Diameter is |
5 | 4 | 2F-9064 Nut | Rotate bearing to assure proper seating of rollers.
Torque to |
6 | 8 | - | Torque to Tighten the bolts to additional turn angle of 180 ± 10 degrees. |
7 | - | - | Torque to |
Caterpillar Information System:
980L Tier 3 Wheel Loader Engine Supplement Exhaust Manifold - Remove and Install
992K Wheel Loader Systems Brake Accumulator - Uncharged
312F and 313F Excavator Machine Systems Pilot Valve (Swing Parking Brake)
D5R and D6N Track-Type Tractor Engine Supplement Hood - Remove and Install
953K Track-Type Loader Machine Systems Power Train System
PL61 Pipelayer Engine Oil and Filter - Change
PL61 Pipelayer Engine Oil Sample - Obtain
PL61 Pipelayer Engine Oil Level - Check
D6T Track Type Tractor Power Train Main Drive Shaft - Remove and Install
Using a SATEL® Satelline-EASy UHF Radio Modem to Connect a Cat® AccuGrade Grade Control System or Cat® GRADE Machine to a Topcon® base station {7220, 7490} Using a SATEL® Satelline-EASy UHF Radio Modem to Connect a Cat® AccuGrade Grade Control System or Cat® GRADE Machine to a Topcon® base station {7220, 7490}
PL61 Pipelayer Engine Air Filter Secondary Element - Replace
PL61 Pipelayer Engine Air Filter Primary Element - Clean/Replace
C7.1 Engines and Generator Sets ARD Fuel Pressure Is Low
992K Wheel Loader Systems Differential and Bevel Gear
Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252} Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252}
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler S60-S70
A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252} A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252}
992K Wheel Loader Systems Brake Accumulator - Charged
C7.1 Engines and Generator Sets ARD Is Disabled
953K Track-Type Loader Machine Systems Brake System
Procedure to Install Tie-off Retrofit on Certain 990H, 990K Wheel Loaders and 844H, 844K Wheel Dozers {0679, 1122, 7323} Procedure to Install Tie-off Retrofit on Certain 990H, 990K Wheel Loaders and 844H, 844K Wheel Dozers {0679, 1122, 7323}
953K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
Track Link Assembly has been Discontinued on Certain D10 Track Type Tractors {4169, 4171} Track Link Assembly has been Discontinued on Certain D10 Track Type Tractors {4169, 4171}
953K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)