Declaration of Conformity
Show/hide table
An EC or EU Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC or EU Declaration of Conformity provided with the machine. The extract shown below from an EC or EU Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified. | ||||||
ORIGINAL EC or EU DECLARATION OF CONFORMITY | ||||||
Manufacturer: Caterpillar Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA | ||||||
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: | ||||||
Standards & Regulations Manager, Caterpillar France SAS
40 Avenue Leon-Blum 38000 Grenoble, France |
||||||
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder | ||||||
Description: | Generic Denomination: | Earth - moving Equipment | ||||
Function: | Wheeled Dozer | |||||
Model/Type: | 854K Wheel Dozer | |||||
Serial Number: | ||||||
Commercial Name: | Caterpillar | |||||
Fulfills all the relevant provisions of the following Directives | ||||||
Directives | Notified Body | Document No. | ||||
2006/42/EC | N/A | |||||
2000/14/EC amended by 2005/88/EC, Note (1) | ||||||
2004/108/EC | N/A | |||||
2014/30/EU | ||||||
Note (1) | Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A) Engine Power per ____-____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File |
|||||
Done at: | Signature | |||||
Date: | Name/Position | |||||
Note: The above information was correct as of September 2011, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details. |
Caterpillar Information System:
992K Wheel Loader Declaration of Conformity
390F Excavator Machine System Final Drive and Motor Fastener (Mounting)
910M, 914M, 918M, 910K, and 914K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
953K Track-Type Loader Machine Systems Bucket Lever and Link - Remove and Install
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Disassemble
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Lubrication
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
390F Excavator Machine System Front Idler
C4.4 and C6.6 Engines Coolant Level Is Low
340F Excavator Machine Systems Boom Lines
C4.4 and C6.6 Engines System Overview
C4.4 and C6.6 Engines Injector Code - Calibrate
D7E Track-Type Tractor Current Sensor - Test
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Assemble
953K Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
D6T XE Electrical & Hydraulic Troubleshooting Current Sensor - Test
Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802} Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802}
340F Excavator Machine Systems Boom Lines
C1.7 and C2.2 Industrial Engines Cylinder Head - Inspect
C1.7 and C2.2 Industrial Engines Engine Valve Lash - Inspect/Adjust
C1.7 and C2.2 Industrial Engines General Information
C1.7 and C2.2 Industrial Engines Electronic Control System Components
Installing the Conversion Harness for Non-Cat Hydromechanical (Simple) Work Tools {1408} Installing the Conversion Harness for Non-Cat Hydromechanical (Simple) Work Tools {1408}