An Improved Fuel Lines Group is Now Used on Certain G3500 Engines {1274, 1741, 5137} Caterpillar


An Improved Fuel Lines Group is Now Used on Certain G3500 Engines {1274, 1741, 5137}

Usage:

G3516H GLM
Engine
G3516H (S/N: GLM1-UP; GLN1-UP)
Generator Set
CG170-16 (S/N: KSJ1-UP)

Description Of Change: The new fuel tube has an improved design and have made the weld flange more robust.

Adaptable To: Replace 324-6795 Tube As with new 446-6701 Tube and 5R-9779 Gasket. The new cast aluminum fuel tube is a direct replacement for the fabricated steel tube, and is expected to extend component life. The new tube is adaptable back to first production on the serial numbers listed above. Refer to Table 1 for information on part number for the tube assembly.



Illustration 1g06102286
Tube assembly

Table 1
Qty  New Part Number  Part Description 
1B-4367  Bolt 
446-6701  Tube 
4K-0367  Full Nut 
5P-8247  Hard Washer 
5R-9779  Gasket 
This change is effective for the serial numbers listed in Table 2.

Table 2
Effective Serial Number 
S/N:KSJ00168-UP 
S/N:GLM00152-UP 
S/N:GLN00124-UP 

Caterpillar Information System:

A New Panel Is Used on Certain C175 Marine and Petroleum Engines {1901, 4460, 7426, 7490} A New Panel Is Used on Certain C175 Marine and Petroleum Engines {1901, 4460, 7426, 7490}
349F and 352F Excavators Fuel Transfer Pump (Refueling) - If Equipped
C4.4 and C6.6 Engines NRS Mass Flow Rate Problem
C175 Tier 4 Final Engines for Off-Highway Trucks Fuel Flow Is High
C175-20 Locomotive Engine Fuel pump (High Pressure) - Replace
C175-20 Locomotive Engine Turbocharger - Replace
PG145 Transmission Transmission Oil Supply - Transmission Oil Level and Transfer Case Oil Level - Test
C4.4 and C6.6 Engines NRS Exhaust Gas Temperature Is High
C4.4 and C6.6 Engines Fuel Temperature Is High
C4.4 and C6.6 Engines Fuel Rail Pressure Problem
C4.4 and C6.6 Engines Exhaust System Contains Oil
HPU300 Hydraulic Power Pack General Information
A New Lifting Eye Retainer Is Used on Certain 3512C Well Service Engines with Dynamic Gas Blending {1122} A New Lifting Eye Retainer Is Used on Certain 3512C Well Service Engines with Dynamic Gas Blending {1122}
A New Heat Exchanger Plate Pack Is Used on Certain C18 Marine Engines {1379} A New Heat Exchanger Plate Pack Is Used on Certain C18 Marine Engines {1379}
C175 Tier 4 Final Engines for Off-Highway Trucks Fuel Priming Pump - Test
C175-16 Oil and Gas Generator Set Maintenance Interval Schedule
C7.1 Marine Engine Alternator - Remove and Install
New Panels Are Used on Certain C280 Marine and Petroleum Engines {1901, 4460, 7426, 7490} New Panels Are Used on Certain C280 Marine and Petroleum Engines {1901, 4460, 7426, 7490}
C4.4 and C6.6 Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C4.4 and C6.6 Engines Aftertreatment Identification Module - Test
C4.4 and C6.6 Engines CAN Data Link - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Fuel Pressure Is High
C7.1 Marine Engine Water Pump - Remove and Install
C4.4 and C6.6 Engines Cooling Fan Control - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.