C7.1 Marine Engine Caterpillar


Fuel Pressure Sensor - Remove and Install

Usage:

C7.1 JEZ

Removal Procedure



    Illustration 1g06100423

  1. Disconnect harness assembly (1) and remove fuel pressure sensor (2).

Installation Procedure

  1. Install fuel pressure sensor (2) in the reverse order of removal.

    1. Tighten fuel pressure sensor (2) to a torque of 10 ± 2 N·m (89 ± 18 lb in).

Caterpillar Information System:

C4.4 and C6.6 Engines Alternator Problem
HPU300 Hydraulic Power Pack Power Pack Connection and Coupling
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pump Motor - Test
C7.1 Marine Engine Engine Oil Pressure Sensor - Remove and Install
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Safety Messages
C4.4 and C6.6 Engines Acceleration Is Poor or Throttle Response Is Poor
Product Evaluation Report - AFA Bad Report {0374, 1000} Product Evaluation Report - AFA Bad Report {0374, 1000}
C4.4 and C6.6 Engines Event Codes
C4.4 and C6.6 Engines Electrical Connectors
A New Alternator Guard Is Used on Certain G3500 Engines {7174} A New Alternator Guard Is Used on Certain G3500 Engines {7174}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Regeneration Does Not Occur
C9.3 Marine Propulsion Engine Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.1/4.2 If equipped
C7.1 Marine Engine Coolant Temperature Sensor - Remove and Install
G3606 and G3608 Engines Maintenance Interval Schedule - Natural Gas Engines That Have a Compression Ratio of 10.5:1 or 11:1
G3606 and G3608 Engines Maintenance Interval Schedule - Engines That Use Bio-Gas
G3606 and G3608 Engines Maintenance Interval Schedule - Wellhead or Natural Gas Engines That Have a 9.2:1 Compression Ratio
G3606 and G3608 Engines Engine Speed/Timing Sensor - Clean/Inspect
C7.1 Marine Engine Speed/Timing Sensor - Remove and Install
C4.4 and C6.6 Engines Crankcase Fumes Disposal Tube Has Oil Draining
C18 Marine Generator Set Engines Timing - Calibrate
C4.4 and C6.6 Engines Diesel Particulate Filter Collects Excessive Soot
C4.4 and C6.6 Engines Diesel Particulate Filter Temperature Is Low
Remote Stop Link on Certain C4.4 and C7.1 Marine Generator Sets {1408, 4493, 449C} Remote Stop Link on Certain C4.4 and C7.1 Marine Generator Sets {1408, 4493, 449C}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.