Belts - Inspect/Adjust/Replace
Gambar 2 menunjukkan berbagai konfigurasi sabuk. Konfigurasi sabuk Anda mungkin berbeda dari apa yang digambarkan.
Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Jadwal Interval Perawatan" ini untuk interval servis.
Show/hide table
| |
| Ilustrasi 1 | g06099957 |
| (1) Pelindung sabuk | |
Show/hide table
| |
| Ilustrasi 2 | g06100041 |
|
Alternator dan sabuk serpentine (2) Tensioner sabuk (3) Sabuk serpentine | |
Show/hide table
| |
| Ilustrasi 3 | g06100132 |
|
Pengencang sabuk umum (4) Lubang persegi untuk ratchet | |
Periksa keausan dan retakan pada sabuk. Ganti sabuk jika sabuk tidak dalam kondisi yang baik.
Periksa tegangan sabuk sesuai informasi di Buku Petunjuk Spesifikasi, "Tabel Tegangan Sabuk".
Selip dari sabuk yang kendur dapat mengurangi efisiensi komponen yang digerakkan. Getaran dari sabuk yang kendur dapat menyebabkan keausan yang tidak perlu pada komponen berikut:
- Sabuk
- Puli
- Bearing
- Lepaskan pelindung sabuk (1).
- Masukkan ratchet dengan penggerak persegi ke dalam lubang persegi (4) yang terletak di pengencang (2) untuk sabuk.
- Putar tensioner berlawanan arah jarum jam untuk melepas tegangan pada sabuk. Lepaskan sabuk (3).
- Pasang sabuk yang baru dengan benar, seperti yang ditunjukkan pada gambar. Pastikan sabuk terpasang sepenuhnya di puli. Tegangan yang benar akan diterapkan secara otomatis saat ratchet dilepaskan.
- Pasang pelindung sabuk.
Caterpillar Information System:
794 AC Off-Highway Truck Rear Wheel Spindle Fasteners - Replace
794 AC Off-Highway Truck Rear Wheel Spindle Fasteners - Inspect
® Marine Display Display
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000} Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
New Engine Software Is Now Used For Certain G3512 Engines {7610, 7620} New Engine Software Is Now Used For Certain G3512 Engines {7610, 7620}
Securing the C4.4 Generator Set for Transportation {7274} Securing the C4.4 Generator Set for Transportation {7274}
® Marine Display Connections
G3612 and G3616 Engines Maintenance Interval Schedule - Engines with a 9.2:1 Compression Ratio and Use Wellhead or Natural Gas
G3612 and G3616 Engines Maintenance Interval Schedule - Bio-Gas Engines
G3612 and G3616 Engines Maintenance Interval Schedule - Engines With 10.5 or 11.1 Compression Ratio and Use Natural Gas
HPU300 Hydraulic Power Pack Before Starting Motor
G3512 Generator Set Engines Restriction of Air Inlet and Exhaust
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Is High
New Solenoid Valve for Certain Gas Engines {5479} New Solenoid Valve for Certain Gas Engines {5479}
794 AC Off-Highway Truck High Voltage Components - Check
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Regeneration Does Not Occur
A New Alternator Guard Is Used on Certain G3500 Engines {7174} A New Alternator Guard Is Used on Certain G3500 Engines {7174}
C4.4 and C6.6 Engines Electrical Connectors
C4.4 and C6.6 Engines Event Codes
Product Evaluation Report - AFA Bad Report {0374, 1000} Product Evaluation Report - AFA Bad Report {0374, 1000}
C4.4 and C6.6 Engines Acceleration Is Poor or Throttle Response Is Poor
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Safety Messages
C7.1 Marine Engine Engine Oil Pressure Sensor - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pump Motor - Test