Rear Wheel Spindle Fasteners - Inspect
Show/hide table
NOTICE |
---|
The lowermost 5 rear wheel spindle bolts on each side of the machine should be inspected during tire changes or during other times when the tires are removed from the machine. |
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
Show/hide table
Illustration 1 g06260005 Location of the rear wheel spindle bolts on the right side of the machine. Show/hide tableIllustration 2 g06233076 - Inspect rear wheel spindle bolts (12) through (16) on each side of the machine. Count the bolts starting with bolt (1) just below the notch. There are a total of 10 bolts to inspect.
- Visually inspect to verify that no bolts are missing or damaged.
- If any bolts are missing or damaged, the bolts must be replaced. Refer to Operation and Maintenance Manual, Rear Wheel Spindle Fasteners - Replace.
Caterpillar Information System:
® Marine Display Display
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000} Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
New Engine Software Is Now Used For Certain G3512 Engines {7610, 7620} New Engine Software Is Now Used For Certain G3512 Engines {7610, 7620}
Securing the C4.4 Generator Set for Transportation {7274} Securing the C4.4 Generator Set for Transportation {7274}
® Marine Display Connections
G3612 and G3616 Engines Maintenance Interval Schedule - Engines with a 9.2:1 Compression Ratio and Use Wellhead or Natural Gas
G3612 and G3616 Engines Maintenance Interval Schedule - Bio-Gas Engines
G3612 and G3616 Engines Maintenance Interval Schedule - Engines With 10.5 or 11.1 Compression Ratio and Use Natural Gas
HPU300 Hydraulic Power Pack Before Starting Motor
G3512 Generator Set Engines Restriction of Air Inlet and Exhaust
G3512 Generator Set Engines Measuring Inlet Manifold Temperature
G3512 Generator Set Engines Manifold Air Pressure Sensor
794 AC Off-Highway Truck Rear Wheel Spindle Fasteners - Replace
C7.1 Marine Propulsion Engine Belts - Inspect/Adjust/Replace
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Is High
New Solenoid Valve for Certain Gas Engines {5479} New Solenoid Valve for Certain Gas Engines {5479}
794 AC Off-Highway Truck High Voltage Components - Check
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Regeneration Does Not Occur
A New Alternator Guard Is Used on Certain G3500 Engines {7174} A New Alternator Guard Is Used on Certain G3500 Engines {7174}
C4.4 and C6.6 Engines Electrical Connectors
C4.4 and C6.6 Engines Event Codes
Product Evaluation Report - AFA Bad Report {0374, 1000} Product Evaluation Report - AFA Bad Report {0374, 1000}
C4.4 and C6.6 Engines Acceleration Is Poor or Throttle Response Is Poor
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Safety Messages