854K Wheel Dozer Caterpillar


Windows - Clean

Usage:

854K H8M
Clean the outside of the windows from the walkaround next to the cab.


Illustration 1g06099444

Cleaning Methods

Commercial Window Cleaner

Apply the cleaner with a soft cloth. Rub the window with moderate pressure until all the dirt is removed. Allow the cleaner to dry. Wipe off the cleaner with a clean soft cloth.

Soap and Water

Use a clean sponge or a soft cloth. Wash the windows with a mild soap or with a mild detergent. Also use plenty of lukewarm water. Rinse the windows thoroughly. Dry the windows with a moist chamois or with a moist cellulose sponge.

Stubborn Dirt and Grease

Wash the windows with a good grade of naphtha, of isopropyl alcohol, or of Butyl Cellosolve. Then, wash the windows with soap and with water.

Polycarbonate Windows (If equipped)

Wash polycarbonate windows with a mild soap or detergent. Never use a cleaning solvent on polycarbonate windows.

Wash polycarbonate windows with warm water and a soft sponge, or damp cloth. Never use a dry cloth or paper towels on polycarbonate windows.

Rinse the windows with a sufficient amount of clean water.

Caterpillar Information System:

980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control - Control System
340F Excavator Machine Systems Relief Valve (Pilot) - Test and Adjust
340F Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration (Optional Test)
340F Excavator Machine Systems Pump Control (Negative Flow) - Adjust
340F Excavator Machine Systems Pump Control (Negative Flow) - Test
D10T2 Fan Pump Update {1387, 5070} D10T2 Fan Pump Update {1387, 5070}
340F Excavator Machine Systems Accumulator (Swing) - Test and Charge
D5R and D6N Track-Type Tractor Power Train Main Drive Shaft - Remove and Install
340F Excavator Machine Systems Joystick and Pedal - Calibrate
340F Excavator Machine Systems Specifications
340F Excavator Machine Systems Gear Pump (Pilot) - Test
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000} Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
992K Wheel Loader Plate Locations and Film Locations
D11 Main Frame Inspection and Weld Repair Procedure {0679, 7051} D11 Main Frame Inspection and Weld Repair Procedure {0679, 7051}
950 GC Wheel Loader Automatic Lubrication System - If Equipped
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Fan Speed - Test and Adjust
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diesel Particulate Filter Regeneration Does Not Occur
Cab Pressurizer Now Available as a Group for Underground Articulated Trucks and Load Haul Dump Machines {7311} Cab Pressurizer Now Available as a Group for Underground Articulated Trucks and Load Haul Dump Machines {7311}
C4.4 and C6.6 Engines Electrical Connectors
C4.4 and C6.6 Engines Event Codes
631K OEM Power Train Speed Sensor (Transmission) - Remove and Install - Tractor
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Oil Pump
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Magnetic Screen
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.