Crankshaft Front Seal - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-7600 | Slide Hammer Puller | 1 |
| B | 1U-8145 | Drill Bit | 1 |
| C | 487-3123 | Installer (Front Crank Seal) | 1 |
Start By:
- Remove the crankshaft pulley.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (B) to drill three evenly spaced holes (1) in crankshaft front seal (2).
- Alternate between the drilled holes and use Tooling (A) to remove crankshaft front seal (1).
Show/hide table
Illustration 2 g06099457 - Remove bolts (3) and remove front cover (4). Remove O-ring seal (5) from the back of front cover (4).
Show/hide table
| |
| Illustration 1 | g06097987 |
Note: Use caution when drilling near the crankshaft.
- Use Tooling (C) to install crankshaft front seal (2).
Show/hide table
| |
| Illustration 3 | g06099541 |
Note: The crankshaft seal is a dry installation.
Caterpillar Information System:
New Basic Engine Components Are Used in C175-16 Engines {1202, 1205} New Basic Engine Components Are Used in C175-16 Engines {1202, 1205}
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207} A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620} New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304} Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304}
HPU300 Hydraulic Power Pack Daily Inspection
HPU300 Hydraulic Power Pack Storage
C12.9 Marine Engines Camshaft Bearings - Remove and Install
SPF343 and SPF343C Trailer Mounted Pumpers Monitoring System
PM820, PM822, and PM825 Cold Planer Machine Systems Flashing (Conveyor) - Remove and Install
SPF343 and SPF343C Trailer Mounted Pumpers Gauges and Indicators
SPF343 and SPF343C Trailer Mounted Pumpers Coolant Level - Check
SPF343 and SPF343C Trailer Mounted Pumpers Manual Stop Procedure
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000} M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Does Not Respond
C175-16 and C175-20 Locomotive Engines Valve Lifter - Install
Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551} Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551}
C175-16 and C175-20 Locomotive Engines Air Inlet Manifold - Remove and Install
C175-16 and C175-20 Locomotive Engines Fuel Pump (High Pressure) - Remove and Install
349F and 352F Excavators Machine System Specifications Swing Drive - Left Swing Drive and Right Swing Drive
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167} ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
C4.4 and C6.6 Engines Diagnostic Trouble Codes
HPU300 Hydraulic Power Pack Hydraulic Oil Filter - Replace
A New Cylinder Liner Assembly And Piston Is Now Used For Certain 3516 Locomotive Engines {1201, 1216} A New Cylinder Liner Assembly And Piston Is Now Used For Certain 3516 Locomotive Engines {1201, 1216}
Failure Analysis Report - AFA Good Report {0374, 1000} Failure Analysis Report - AFA Good Report {0374, 1000}