Camshaft Bearings - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 487-3135 | Tool (Camshaft Bearing) | 4 |
Start By:
- Remove crankshaft.
- Use Tooling (A) to remove camshaft bearings (1) from the cylinder head.
Note: Note the location and orientation of bearing oil holes prior to removing bearings.
Show/hide table
Illustration 1 | g06097395 |
- Install camshaft bearings (1) in the reverse order of removal.
- Position camshaft bearings so that the oil holes are oriented as noted in the removal procedure.
Caterpillar Information System:
SPF343 and SPF343C Trailer Mounted Pumpers Monitoring System
PM820, PM822, and PM825 Cold Planer Machine Systems Flashing (Conveyor) - Remove and Install
SPF343 and SPF343C Trailer Mounted Pumpers Gauges and Indicators
SPF343 and SPF343C Trailer Mounted Pumpers Coolant Level - Check
SPF343 and SPF343C Trailer Mounted Pumpers Manual Stop Procedure
SPF343 and SPF343C Trailer Mounted Pumpers Engine Oil Level - Check
C280 Marine Engines Air Pressure Regulator Group
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pivot - Remove and Install
C280 Marine Engines Diesel Exhaust Fluid Tank
3500 Engines Gear Group (Rear)
C175-20 Locomotive Engine Aftercooler Core - Inspect/Clean
PM820, PM822, and PM825 Cold Planer Machine Systems Upper Sheave (Rotor Drive) - Remove and Install
HPU300 Hydraulic Power Pack Storage
HPU300 Hydraulic Power Pack Daily Inspection
Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304} Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620} New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207} A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}
New Basic Engine Components Are Used in C175-16 Engines {1202, 1205} New Basic Engine Components Are Used in C175-16 Engines {1202, 1205}
C12.9 Marine Engines Crankshaft Front Seal - Remove and Install
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000} M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Does Not Respond
C175-16 and C175-20 Locomotive Engines Valve Lifter - Install
Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551} Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551}
C175-16 and C175-20 Locomotive Engines Air Inlet Manifold - Remove and Install