C280 Marine Engines Caterpillar


Air Pressure Regulator Group

Usage:

C280-08 J4R


图 1g06097064

表 1
技术规格,适用于 361-3082 调节器 
项目  数量  零件  技术规格说明 
361-3082 调节器  安装扭矩为 140 ± 14 N·m (103 ± 10 lb ft)。 

Caterpillar Information System:

PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pivot - Remove and Install
C280 Marine Engines Diesel Exhaust Fluid Tank
3500 Engines Gear Group (Rear)
C175-20 Locomotive Engine Aftercooler Core - Inspect/Clean
PM820, PM822, and PM825 Cold Planer Machine Systems Upper Sheave (Rotor Drive) - Remove and Install
C175-16 Locomotive Engine Thermostatic Valve - Inspect
C280 Marine Engines Solenoid Valve (DEF Return)
C175-16 and C175-20 Locomotive Engines Fuel Lines - Install - High Pressure
New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920} New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920}
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Camshaft
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
SPF343 and SPF343C Trailer Mounted Pumpers Engine Oil Level - Check
SPF343 and SPF343C Trailer Mounted Pumpers Manual Stop Procedure
SPF343 and SPF343C Trailer Mounted Pumpers Coolant Level - Check
SPF343 and SPF343C Trailer Mounted Pumpers Gauges and Indicators
PM820, PM822, and PM825 Cold Planer Machine Systems Flashing (Conveyor) - Remove and Install
SPF343 and SPF343C Trailer Mounted Pumpers Monitoring System
C12.9 Marine Engines Camshaft Bearings - Remove and Install
HPU300 Hydraulic Power Pack Storage
HPU300 Hydraulic Power Pack Daily Inspection
Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304} Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620} New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207} A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.