The Payload Hotkey button is available on the following models when the Cat Production Measurement (CPM) installed and enabled.
- 988 T4f
- 988 LRC
- 990 T4f
- 990 LRC
- 992 T4f
- 992 LRC
- 993 T4f
- 993 LRC
- 994 T4f
Illustration 1 | g03886128 |
Main Performance Page (1) "Hotkey" buttons (Left Side) (2) Top-Level Navigation buttons (Right Side) |
Illustration 2 | g03886152 |
Secondary Performance Page |
Illustration 3 | g03886170 |
(3) "Menu Navigation" buttons (Right Side) |
When a category is selected, a menu appears and the right-side buttons change to "Navigation" buttons. While in submenus, the right buttons are displayed as the "Menu Navigation" keys for the selected category. In this state, the right side buttons are:
- UP Arrow button
- OK button
- DOWN Arrow button
- BACK button
- HOME button
Overview of the Information Display
The Performance page is the main introductory page on the Large Wheel Loader (LWL) Information Display. Real-time Machine Information is displayed within the Performance Page. The buttons on the left side of the Display are the "Hotkey" buttons which are configured for the LWL. The buttons on the right side of the Display are the "Top Level Navigation" buttons. The right-side buttons serve as the principle navigation buttons. In this state, the right side buttons are:
- Display
- Machine
- Totals
- Service
- Operator
On the Main Performance Page (the top level), the right side buttons represent the main navigation categories. When a category is selected, a menu appears and the right side buttons change to Menu Navigation buttons.
The navigation levels below the top level or category navigation are the submenus. While in the menu pages, the Top-Level Navigation buttons (right side buttons) are now displayed as the Menu Navigation buttons for the selected category. In this state, the right side buttons are:
The buttons on the left side of the LCD are considered hotkey buttons and are configured for the Large Wheel Loader (LWL).
- UP Arrow button
- OK button
- DOWN Arrow button
- BACK button
- HOME button
The Menu Navigation buttons will remain visible on the right-hand side of the Display until the operator returns to the Main Performance Page. Returning to the Main Performance Page is performed, most likely by pressing the HOME button.
The buttons on the right side of the Display are essentially common between all machines.
Illustration 4 | g06095256 |
Illustration 5 | g06255423 |
Illustration 6 | g03342291 |
"Left Side" buttons are machine-application specific. |
The Payload Hotkey button is available on the following models when the Cat Production Measurement (CPM) installed and enabled.
Menu Buttons and Menu Button Groups
Illustration 7 | g03886232 |
Menu Button Groups |
Navigation through menu lists and submenus is possible by using the menu buttons. When pressed, menu buttons will initially show blue. The button will then be highlighted in yellow to indicate the Displays current selection. A menu page is accessible by performing one of the following actions:
- Directly touching a menu button
- Using the navigation buttons along the right side of the Display
Pressing a specific menu button will access that specific menu page. To return to the menu page, press the BACK button. The selected menu button will remain yellow until changed.
Illustration 8 | g06255723 |
On certain machines, if more than four options are available and appear on a menu page, a non-interactive scroll bar will appear.
For more information, refer to the following section (Scroll Bar / Menu Sliding Indicator).
The scroll bar object is used to navigate between the Main Performance pages. There are two types of scroll bars:
- Interactive
- Non-Interactive
The interactive scroll bar distinguishes itself from the non-interactive scroll bar by using an image to show the button characteristic in the Cat® Yellow color.
The Interactive Scroll Bar (6) allows the operator to scroll between Performance Page 1 and Performance Page 2. Performance Page 2 contains the Intelligent Compaction feature. Pressing the UP Arrow button or the DOWN Arrow button allows the operator to scroll between the two Performance Pages.
The Menu Sliding Indicator of the Interactive Scroll is also visually wider and has an expanded (non-visible) activation zone to reduce activation error.
The Menu Sliding Indicator of the Interactive Scroll Bar brings the next page into view by a touch of either the UP Arrow button or the DOWN Arrow buttons on the scroll bar.
Note: If the machine is a 815Kor 825Kand the Compaction System has been installed, an Interactive Scroll Bar will be visible on Performance Page 1. For more information, refer to the following section in this manual: Intelligent compaction
Illustration 9 | g03681871 |
Illustration 10 | g06095292 |
(4) Yellow UP Arrow button
(5) Menu Sliding Indicator (6) Yellow DOWN Arrow button |
Illustration 11 | g06095279 |
(7) A three-page Menu Sliding Indicator is set to page 1.
(8) A three-page Menu Sliding Indicator is set to page 2. (9) A three-page Menu Sliding Indicator is set to page 3. |
Illustration 12 | g06095282 |
(10) Non-Interactive Scroll Bar with Slider Indicator
(11) UP Arrow button (12) OK button (13) DOWN Arrow button (14) BACK button (15) HOME button |
The Non-Interactive Scroll Bar (10) uses only the UP Arrow button (11) and DOWN Arrow button (13) to make a selection. Selections are made in increments and made one at a time.
- Press the OK button (12) to enter the intended page.
- Press the BACK button (14) to return to the previous page.
- Press the HOME button (15) to return to the Home Page.
Note: The Scroll Bar Menu Sliding Indicator (center gray box) on either scroll bar cannot be used to drag the page UP or DOWN. The Menu Sliding Indicator will move with pressing either the UP Arrow button or DOWN Arrow button.
Some settings within the Display require an adjustment of values or numbers by using the Increment/Decrement Bar.
There are two types of Increment/Decrement Bars:
- Increment/Decrement Bars that adjust a value range in increments
- Increment/Decrement Bars that adjust a numerical range in increments
Illustration 13 | g06095299 |
(16) Increment/Decrement Bar – Value range adjustment in increments |
Illustration 14 | g06095310 |
(13) OK button
(17) Increment/Decrement Bar – Numerical range adjustment in increments |
- Decrease a setting by pressing the MINUS (-) button (18) on the left end of the Increment Bar.
- Increase a setting by pressing the PLUS (+) button (19) on the right end of the Increment Bar.
- Release the button at the intended setting.
Illustration 15 | g06095315 |
(18) MINUS (-) button
(19) PLUS (+) button |
Increment / Decrement Bar with Numbers
- Decrease a number by pressing the MINUS (-) button (18) on the left end of the Increment Bar.
- Increase a number by pressing the PLUS (+) button (19) on the right end of the Increment Bar.
- The number will highlight in yellow when setting. Release the button when the intended number appears.
- Press the OK button (13) to lock in the new number
- The new number will be displayed in white text.
Illustration 16 | g06095318 |
(13) OK button
(20) Minus (-) button (21) Plus (+) button |