Radiator
Show/hide table
| |
| Illustration 1 | g06039428 |
Show/hide table
| Specification for 376-0064 Radiator Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 2 | 455-7326 Seal | Before assembly, apply rubber and gasket adhesive to the surface of the seal. |
| 2 | 1 | 455-7327 Seal | Before assembly, apply rubber and gasket adhesive to the surface of the seal. |
| 3 | 2 | 455-7325 Seal | Before assembly, apply rubber and gasket adhesive to the surface of the seal. |
| 4 | 2 | 455-7323 Seal | Before assembly, apply rubber and gasket adhesive to the surface of the seal. |
| 5 | 2 | 455-7324 Seal | Before assembly, apply rubber and gasket adhesive to the surface of the seal. |
| 6 | 8 | 7X-0474 Bolt | Torque to |
Caterpillar Information System:
C18 Generator Set Engines Diesel Particulate Filter - Remove and Install
Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064} Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064}
Proximity Awareness Commissioning Checklist {7605, 7610, 7620} Proximity Awareness Commissioning Checklist {7605, 7610, 7620}
Cat® Command for Hauling Terrain Onboard Commissioning Procedure {7610, 7620} Cat® Command for Hauling Terrain Onboard Commissioning Procedure {7610, 7620}
Improved Transmission Filter Bypass Switch is Now Used on Certain Products {3004, 3067} Improved Transmission Filter Bypass Switch is Now Used on Certain Products {3004, 3067}
Cat® Site Positioning Commissioning Procedure {7605, 7610, 7620} Cat® Site Positioning Commissioning Procedure {7605, 7610, 7620}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Sensor Supply - Test
C18 Generator Set Engines Catalyst (SCR) - Remove and Install
C4.4 and C7.1 Engines Engine Misfires, Runs Rough or Is Unstable
XQP500 Generator Sets Control Panel
TR35 Railway Transmission Gear Pump (Transmission)
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Electric Starting Motor
C12.9 Marine Engines Crankcase Pressure Sensor - Remove and Install
XQP150 Rental Generator Set Battery - Replace
XQP150 Rental Generator Set Alternator - Inspect
3512E Engines Engine Oil Pan - Remove and Install
XQP1100 Generator Set Stopping the Engine
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Closed Crankcase Ventilation (CCV) System
C18 Generator Set Engines Inlet Module (Catalyst) - Remove and Install
C18 Generator Sets Voltage Regulators
C18 Generator Set Engines Air Inlet Elbow - Remove and Install
3512E Engines Engine Oil Pan - Disassemble
C175 Generator Sets Overhaul (Top End)
C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install