Track Links
Show/hide table
Illustration 1 | g03019681 |
Show/hide table
Specification for 424-3547 Track Link As | |||
Item | Qty | Part | Specification Description |
- | 4 | 238-0472 Track Bolt | Use the following procedure to tighten the track bolts:
1. Tighten the bolts to a torque of 2. Again, tighten the bolts to an additional turn of 120 ± 5 degrees. |
- | 4 | 254-0227 Bolt | Use the following procedure to tighten the center strut clamp master track bolts:
1. Tighten the bolts to a torque of 2. Again, tighten the bolts to an additional turn of 120 ± 5 degrees. |
A | - | - | Distance from the center of one track pin to the center of the next track pin is |
B | - | - | Distance from the center of the track pin to the counterbore is |
C | - | - | Distance between the centerlines of the bolt holes for the track shoes is |
D | - | - | Extension of the track pin at each end of the track link assembly is |
F | - | - | Outside diameter of a new track bushing is |
G | - | - | Distance between the track links is |
H | - | - | Height of the new track link is |
J | - | - | Depth of the clear plug from the face of the pin is |
Caterpillar Information System:
D6K2 and D6K Track-Type Tractor Systems Track Idler
D6K2 and D6K Track-Type Tractor Systems Angle Cylinder (Bulldozer)
D6K2 and D6K Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
D6K2 and D6K Track-Type Tractor Systems Track Roller Frame
D6K2 and D6K Track-Type Tractor Systems Track Roller Frame
D6K2 and D6K Track-Type Tractor Systems Joystick Control (Blade)
D6K2 and D6K Track-Type Tractor Systems Window Wiper and Wiper Motor
Procedure to Reprogram the Machine ECM on Certain Compact Wheel Loaders {7490, 7600, 7610, 7620} Procedure to Reprogram the Machine ECM on Certain Compact Wheel Loaders {7490, 7600, 7610, 7620}
994K Large Wheel Loader Field Assembly Manual Position Sensor (Lift, Tilt) - Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
Engine Damper Guards are Now Available For Certain D9T Track-Type Tractors {1205, 7150} Engine Damper Guards are Now Available For Certain D9T Track-Type Tractors {1205, 7150}
994K Large Wheel Loader Field Assembly Manual Tilt Cylinder - Install
New Hose Assemblies for the Tilt Cylinders Are Used on Certain 980M Medium Wheel Loaders {5057, 5104} New Hose Assemblies for the Tilt Cylinders Are Used on Certain 980M Medium Wheel Loaders {5057, 5104}
D6K2 and D6K Track-Type Tractor Systems Angle Cylinder (Bulldozer)
953K Track-Type Loader Power Train Piston Pump (Hydrostatic) - Remove and Install
D6K2 and D6K Track-Type Tractor Systems Flexible Exhaust Pipe
D6K2 and D6K Track-Type Tractor Systems Ether Starting Aid
D6K2 and D6K Track-Type Tractor Systems Angle Cylinder (Bulldozer)
Information on How to Make Field Improvements to the Radiator Guard/Grill is Available on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7155} Information on How to Make Field Improvements to the Radiator Guard/Grill is Available on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7155}
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood - Remove and Install - One Piece Hood
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install - Smart Actuator
Fabricated Plates can Enhance the Operation of the Powered Access Ladder for Certain H-Series Wheel Tractor-Scrapers {0679, 7254} Fabricated Plates can Enhance the Operation of the Powered Access Ladder for Certain H-Series Wheel Tractor-Scrapers {0679, 7254}
Installation Procedure for the Conversion of the Fan Drive System on Certain Track-Type Loaders {1359} Installation Procedure for the Conversion of the Fan Drive System on Certain Track-Type Loaders {1359}
Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810} Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810}