New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620} Caterpillar


New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620}

Usage:

793B 1HL
Articulated Truck
740 (S/N: WWD1-UP; AXM1-UP; B1P1-UP; DTX1-UP; AZZ1-UP)
740 EJECTOR (S/N: B1R1-UP)
740B (S/N: L4E1-UP; GLH1-UP; T4R1-UP; E4S1-UP)
740B EJECTOR (S/N: L4F1-UP; T4S1-UP)
Harvester Head
SAT322TSC (S/N: SHM1-UP)
Industrial Engine
D342C IND (S/N: 05A1-UP)
Landfill Compactor
816K (S/N: LT61-UP; WNB1-UP; SLL1-UP; WCL1-UP)
826K (S/N: 2321-UP; 2L31-UP; 2T61-UP; SET1-UP)
836K (S/N: T6X1-UP; L6Z1-UP; LWZ1-UP; TWZ1-UP)
Mining Truck
794 AC (S/N: HRT1-UP)
Motor Grader
16H (S/N: 6ZJ1-UP; ATS1-UP)
16M (S/N: B9H1-UP; R9H1-UP)
24H (S/N: 7KK1-UP)
24M (S/N: B9K1-UP)
Off-Highway Truck/Tractor
769 (S/N: 99F1-UP; 35W1-UP)
770G (S/N: ECM1-UP)
772 (S/N: RLB1-UP; RGK1-UP; J2M1-UP)
772G (S/N: LTS1-UP)
773D (S/N: NBJ1-UP; BGL1-UP; 7ER1-UP; 7CS1-UP; 7FZ1-UP)
773E (S/N: BDA1-UP; PRB1-UP; KEG1-UP; ASK1-UP; DJS1-UP)
773F (S/N: EED1-UP; EXD1-UP)
777C (S/N: 4XJ1-UP)
777D (S/N: DCB1-UP; AGC1-UP; FKR1-UP; 3PR1-UP; 2YW1-UP; AGY1-UP; 6XZ1-UP)
777E (S/N: KDP1-UP; KDZ1-UP)
777F (S/N: WTK1-UP; JRP1-UP; JXP1-UP)
777G (S/N: GT71-UP; T5A1-UP; TNM1-UP; RDR1-UP; T4Y1-UP)
785B (S/N: 6HK1-UP)
785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
785D (S/N: DMC1-UP; MSY1-UP)
785G (S/N: SH21-UP; TRG1-UP; RTL1-UP; WHS1-UP)
789 (S/N: 9ZC1-UP)
789B (S/N: 7EK1-UP)
789C (S/N: 2BW1-UP)
789D (S/N: SPD1-UP; SHH1-UP; TWP1-UP)
789G (S/N: TR21-UP)
793 (S/N: 3SJ1-UP)
793B (S/N: 1HL1-UP)
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
793D (S/N: FDB1-UP)
793F (S/N: SND1-UP; SSP1-UP; D3T1-UP; RBT1-UP)
793F AC (S/N: EMD1-UP)
794 AC (S/N: MN51-UP; MT51-UP)
795F AC (S/N: ERM1-UP)
795FAC XQ (S/N: SNT1-UP)
796 (S/N: HRY1-UP; HRZ1-UP)
797 (S/N: 5YW1-UP)
797B (S/N: JSM1-UP)
797F (S/N: LAJ1-UP; WSP1-UP; LTZ1-UP)
798 (S/N: ST71-UP)
Quarry Truck
771D (S/N: BCA1-UP; 6JR1-UP; 6YS1-UP)
773G (S/N: MWH1-UP; JWS1-UP; T5S1-UP; T5T1-UP)
775D (S/N: 6KR1-UP; 8AS1-UP)
775E (S/N: BEC1-UP)
775F (S/N: EYG1-UP; DLS1-UP)
775G (S/N: T5F1-UP; RFM1-UP; MJS1-UP; T5W1-UP)
Soil Compactor
815K (S/N: SL91-UP; MBB1-UP; WCS1-UP; T1Y1-UP)
825K (S/N: 2331-UP; 2L91-UP; 2T91-UP; SEE1-UP)
Transmission
TH55 - KRESS (S/N: KCH1-UP)
Wheel Dozer
814K (S/N: LW41-UP; DMB1-UP; WCM1-UP; T1Z1-UP)
824K (S/N: 2T21-UP; 2L41-UP; 2341-UP; RWB1-UP)
834G (S/N: BPC1-UP; 6GZ1-UP)
834H (S/N: BTX1-UP)
834K (S/N: TW41-UP; L4Y1-UP; LWY1-UP; TWY1-UP)
844H (S/N: BTW1-UP)
844K (S/N: MBE1-UP; M4R1-UP; KLS1-UP; K4Y1-UP)
854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
854K (S/N: 2211-UP; RM31-UP; KK61-UP; RM61-UP; H9K1-UP; H8M1-UP)
Wheel Loader
980H (S/N: P8B1-UP; MHG1-UP; A8J1-UP; KZL1-UP; JMS1-UP)
980K (S/N: W7K1-UP; GTZ1-UP)
986K (S/N: MH81-UP; NL81-UP; SWH1-UP)
988G (S/N: BNH1-UP; 2TW1-UP)
988H (S/N: BXY1-UP)
988K (S/N: T8E1-UP; L8X1-UP; LWX1-UP; TWX1-UP)
988K XE (S/N: E8X1-UP; EWX1-UP)
990 (S/N: 7HK1-UP)
990 Series II (S/N: BCR1-UP; 4FR1-UP)
990H (S/N: BWX1-UP)
990K (S/N: DJK1-UP; A9P1-UP; M9P1-UP; K9X1-UP)
992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
992K (S/N: 8801-UP; KK21-UP; RM21-UP; KK41-UP; RM51-UP; H4C1-UP; ZMX1-UP)
993K (S/N: LWA1-UP; Z4D1-UP; Z8D1-UP; Z9K1-UP; RDM1-UP; MCZ1-UP; Z4Z1-UP; Z8Z1-UP)
994D (S/N: 3TZ1-UP)
994F (S/N: 4421-UP)
994H (S/N: DWC1-UP)
994K (S/N: MM91-UP; MRK1-UP; SMX1-UP)

Reference: Refer to Operation and Maintenance Manual, SEBU8820, "Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers, and Articulated Trucks" for more details on the operator interface changes.

Reference: Refer to Operation and Maintenance Manual, SEBU8821, "Cat® Detect Object Detection Hardware Generation 4 for Large Mining Trucks" for more details on the operator interface changes.

Reference: Refer to Special Instruction, REHS7353 , "Procedure for Installing Object Detection Software on Monitor Display Group" - , Installation of Object Detection Software on Touch Screen Display

New software is now available for all Cat® Object Detection and Vision applications on certain Cat® products. The changes and improvements of the new software are listed below:

  • Included 1.6.1 OS update

  • Updated Spanish language support

  • Added support for multiple models including 798 AC models

  • Added C4 radar support 365-1271 Object Detection Sensor Gp support for 988K/834K machines

  • Improved 2348-09 diagnostic handling for 988K models

The new software part number is listed in Table 1.

Table 1
Required Parts 
Qty  Part Number  Part Name 
567-4710  Monitor Software Gp (SW for LMT Radar) 
567-4711  Monitor Software Gp (SW for LWL, MG, and AT Radar) 
567-4712  Monitor Software Gp (SW for LMT and SOHT Vision) 
567-4713  Monitor Software Gp (SW for LWL, MG, and AT Vision) 
555-6696  Monitor Software Gp (SW for SOHT Radar) 

Note: This software cannot be installed on the 355-9048 Monitor Display Gp or the 355-9045 Monitor Display Gp. Refer to Display Hardware requirements.

Note: This software is intended to be installed on the 459-2220 Monitor Display Gp only, but can be installed on older displays if they were factory fitted such as the 373-2281 Display Module Gp and the 441-5131 Display Module Gp.

Note: If loading this software over an older file, the display application erase file 502-4019 Engine Ratings Electronic Software Gp must be used. Failure to do so can result in the application failing to update after the operating system has loaded.

The new software supports the following languages:

  • English

  • Spanish

  • French

  • Portuguese

  • German

  • Norwegian

  • Swedish

  • Finnish

  • Dutch

  • Danish

  • Italian

  • Greek

  • Turkish

  • Indonesian

  • Russian

  • Japanese

  • Hungarian

  • Icelandic

  • Czech

  • Polish

  • Chinese

  • Thai

  • Slovenian

  • Slovakian

  • Estonian

  • Latvian

  • Lithuanian

  • Korean

  • Serbian

  • Croatian

  • Romanian

  • Vietnamese

  • Mongolian

  • Hindi

Display Hardware Requirement

  • 459-2220 Electronic Control Gp (G407 Touch Screen Display)

  • 441-5131 Display Module Gp (Touch Screen Display)

  • 373-2281 Display Module Gp (Touch Screen Display) - support for up to three cameras only

Build Date

  • July 2018

Cat® Electronic Technician (Cat ET) Requirement

  • 2015A or newer

For software installation instructions, refer to Special Instruction, REHS7353 , "Procedure for Installing Object Detection Software on Monitor Display Group" - , Installation of Object Detection Software on Touch Screen Display.

New UI Example



Illustration 1g03406762
(1) Camera View
(2) Alarm Acknowledge Button
(3) Reference Line Button
(4) System Menu Button
(5) Alarm Acknowledged Indicator
(6) Indicator for the System
(7) Proximity Indicator Bar
(8) Product ID
(9) Zone Directional Indicator

Caterpillar Information System:

HPU300 Hydraulic Power Pack Motor Stopping
HPU300 Hydraulic Power Pack Tire Information
HPU300 Hydraulic Power Pack Electrical System
C175-20 Locomotive Engine Manifold DEF Temperature Is Low
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Description
C175-16 Locomotive Engines Fuel Filter Differential Pressure - Check
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Bearing - Replace
A New Air-To-Air Aftercooler Hose Is Used on Certain C27 and C32 Engines {1071} A New Air-To-Air Aftercooler Hose Is Used on Certain C27 and C32 Engines {1071}
Energy Storage System Module LIN Communication Wiring (Expanded Enclosure)
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Fuel Injection Lines
Information on A/D/G Coatings for Bolts, Spacers, and Washers {7000, 7553, 7553} Information on A/D/G Coatings for Bolts, Spacers, and Washers {7000, 7553, 7553}
C18 Generator Set Engines Nozzle Heater Harness - Remove and Install
C1.7 and C2.2 Industrial Engine Component Location
C18 Generator Set Engines Ignition Coil - Remove and Install
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Storage
HPU300 Hydraulic Power Pack Operation
A New Thermostat Housing Bracket Is Used on Certain 3500 Marine Engines {1380, 1393} A New Thermostat Housing Bracket Is Used on Certain 3500 Marine Engines {1380, 1393}
G3512 Generator Set Safety Messages
G3512 EPA Emergency and Non-Emergency Standby Generator Sets General Hazard Information
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Refill Capacities
HPU300 Hydraulic Power Pack Before Operation
New Software Is Used on Certain 3500 Tier 3 Marine Engines {1920} New Software Is Used on Certain 3500 Tier 3 Marine Engines {1920}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Operation
A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205} A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.