336D2 and 340D2 Excavators Machine System Caterpillar


Hydraulic Tank Mounting

Usage:

336D2 DGR


Illustration 1g06008909
Typical example

Table 1
Item  Qty  Part  Specification Description 
447-1707 Bolt  Before assembly, apply red Loctite 263 to the threads or may use Three Bond 2471 or 1305 to the threads.
Torque to 270 ± 40 N·m (199 ± 30 lb ft)

Caterpillar Information System:

336D2 and 340D2 Excavators Machine System Fuel Tank and Mounting
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434} An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434}
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
316F Excavator Machine Systems Electronic Control (Travel System)
316F Excavator Machine Systems Electronic Control (Swing System)
New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620} New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
336D2 and 340D2 Excavators Machine System Suction Fan
312F and 313F Excavator Machine Systems Electronic Control (Main Control Valve)
336D2 and 340D2 Excavators Machine System Mounting Bracket
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 03
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Fuel Tank - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 06
PM310, PM312 and PM313 Cold Planer Machine Systems Check Valve
307E2 Mini Hydraulic Excavator Machine Systems Seat - Assemble
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Linkage - Remove and Install
Installation of the 467-4861 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 467-4861 Front Lines Gp on Certain Hydraulic Excavators {5057}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Loaded Bucket
Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000} Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.