Coupling - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 333-9726 | Polyethylene Film | - |
- Ensure that Tooling (A) is installed between the rotor and the stator to prevent damage to these components.
Show/hide table
Illustration 1 g03893579 - Remove retaining strap (2). Repeat for the other side. Remove bolts (1). Remove bolts (3) and remove flexible coupling (4).
- Install flexible coupling (4) in the reverse order of removal.
Caterpillar Information System:
794 AC Off-Highway Truck Machine Systems Steering Control Valve - Remove and Install
Improvements to the Main Hydraulic Pump are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5070} Improvements to the Main Hydraulic Pump are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5070}
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Relief Valve (Pilot)
794 AC Off-Highway Truck Machine Systems Solenoid and Manifold Valve (Steering) - Remove and Install
794 AC Off-Highway Truck Machine Systems Solenoid Valve and Manifold (Blower Fan, Final Drive Lubrication, Steering) - Remove and Install
C7.1 Engines Cooling Fan Control - Test - Viscous Clutch Fan
307, 308, 309 and 310 EXCAVATOR Bucket Linkage
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Radiator and Hydraulic Oil Cooler
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lines
C3.3B and C3.8 Engines for Caterpillar Built Machines Injector Solenoid - Test - Fuel Injector
C3.3B and C3.8 Engines for Caterpillar Built Machines Injector Data Incorrect - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines NOx Sensor - Test
3516E Generator Set Engine Electronic Control Module (ECM)
349F and 352F Excavators Selective Catalytic Reduction Warning System
3516E Generator Set Engine Fuel Pressure
C3.3B and C3.8 Engines for Caterpillar Built Machines NOx Conversion Is Low
G3606 and G3608 Engines Fuel Shutoff Solenoid - Remove and Install
352F OEM Excavator Based Specialty Solutions Shipping the Machine
G3508J, G3516J, and G3520J Engines Accessory Drive (Front) - Assemble
G3508J, G3516J, and G3520J Engines Gear Group (Rear) - Remove
G3508J, G3516J, and G3520J Engines Gear Group (Rear) - Install
G3508J, G3516J, and G3520J Engines Rocker Shaft and Push Rod - Remove
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Exhaust Manifold Shield - Remove and Install
G3508J, G3516J, and G3520J Engines Rocker Shaft and Push Rod - Install