Service > Diagnostics
- Press the "Service" button (1).
The Service menu page will appear.
Show/hide table
Illustration 2 g06003522 Diagnostics screen - Press "Diagnostics".
"Diagnostics" will highlight in blue and the "Events List" will appear.
| |
| Illustration 1 | g06004213 |
|
Main screen (1) "Service" button | |
Service > Diagnostics > Events List
The "Events List" screen will display a fault list when active and/or logged events are present. A code, description, and activity status will accompany each event:
- The letter "X" will appear in the "Active" column when the status of the event is "Active".
- A dash (-) will appear in the "Active" column when the status of the event is logged (and not "Active").
- Scroll through the list of events line-by-line by pressing the Up and Down arrow buttons on the right side of the display.
A different event will highlight in yellow at the press of the Up or Down arrow button.
- Scroll through pages of events by pressing the Up and Down double arrow buttons on the top of the Display page.
Service > Diagnostics > Events Details
- Press "OK" to select the highlighted event.
The "Events Details" screen will appear with additional information.
Show/hide table
Illustration 3 g06003525 Event List screen - Press the Back button to return to the previous menu.
Service > ECM Summary
- Press the "Service" button (1).
The Service menu page will appear.
Show/hide table
Illustration 4 g06003526 ECM Summary screen - Press "ECM Summary".
"ECM Summary" will highlight in blue and the ECM Summary menu will appear.
Show/hide table
Illustration 5 g06003527 ECM Selection screen - Select an ECM.
The ECM will highlight in blue.
The ECM Summary information will appear.
| |
| Illustration 6 | g06003570 |
|
ECM Summary Information screen example | |
Press the Back button to return to the previous menu.
Service > Service Mode
Note: A password (pass code) is required to access expanded Configuration and Calibrations menus.
Note: Service mode is deactivated when the machine is shut down.
- Press the "Service Mode" button.
A Service Mode page with a keypad will appear if Service Mode is disabled. A keypad will not appear if Service mode is already activated.
- To enable "Service Mode" and access expanded Configuration and Calibration menus, enter a password (pass code numbers) on the keypad.
- Select "Enable".
- Press the "OK" button.
- Press the Back button to return to the previous menu.
| |
| Illustration 7 | g06127980 |
When Service Mode is "Enabled":
- View expanded Configurations and Calibrations on the current Service Menu page
- Adjust Configuration settings and perform Calibrations
| |
| Illustration 8 | g06003590 |
|
Service Mode Disable screen | |
When Service Mode is "Disabled":
- A subset of Configurations and Calibrations will not appear on the Service Menu page
Service > Configurations
- Press "Payload".
"Payload" will highlight in blue and the Payload Configuration menu pages will appear.
Service > Configurations > Payload
- Press "Configurations".
"Configurations" will highlight in blue and the "Configurations" page will appear.
Show/hide table
Illustration 10 g06003606 Configurations screen - Press "Payload".
"Payload" will highlight in blue and the "Payload" Configuration menu pages will appear.
| |
| Illustration 9 | g06003595 |
|
Service Configuration screen | |
| |
| Illustration 11 | g06127956 |
|
Payload Configuration screen 1 (Service Mode) | |
| |
| Illustration 12 | g06127959 |
|
Payload Configuration screen 2 (Service Mode) | |
| |
| Illustration 13 | g06127953 |
|
Payload Configuration screen (Not in Service Mode) | |
| |
| Illustration 14 | g06003662 |
|
Printer Installation screen | |
The options in the Printer Installation screen are "Installed" or "Not Installed".
Auto Truck ID
| |
| Illustration 15 | g06003664 |
|
Auto Truck ID Configuration screen | |
The options in the Auto Truck ID Configuration screen are "Enabled" and "Disabled".
Auto Material ID
| |
| Illustration 16 | g06003672 |
|
Auto Material ID Configuration screen | |
The options in the Auto Material ID Configuration screen are Enabled and Disabled.
Scale Data Source
| |
| Illustration 17 | g06127975 |
|
Scale Data Source screen | |
The options in the Scale Data Source screen are "Cat®" or "Other".
For CPM to work, Scale data source needs to be set to CAT and CAT data source set to Enabled.
Cat® Scale
| |
| Illustration 18 | g06127969 |
|
Cat® Scale screen | |
The options in the Cat® Scale screen are "Enabled" or "Disabled".
Cat® Scale Demo
| |
| Illustration 19 | g06004917 |
|
Cat® Scale Demo screen | |
The options in the Cat® Scale Demo screen are "Installed" or "Not Installed".
Configurations With Cat® Electronic Technician (Cat ET)
The overload warning feature notifies the operator when a payload measurement exceeds 116.5% of the Loader Bucket Payload Target Weight configured in Cat® Electronic Technician (Cat ET) . The feature can be enabled/disabled through Cat ET as well, and is disabled by default. If a low lift weight or scaled weight shows overloaded, and the machine has gone to reverse since digging, the operator will be notified via a pop-up. This fault is also sent off board into VisionLink® and logged on the machine. The system monitors for overload both in normal operating mode and in standby mode. (VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries).
The overload warning will be cleared when a low lift or scaled weight is below the threshold is generated.
Reference: For information on how to determine an appropriate overload limit see Payload Policy, AEXQ1391-00, "Cat Medium Wheel Loader Payload Policy - K Series, M Series". This media can be found on the Cat Media Information Center (CMIC) at https://cmic.cat.com/cda/files/4726317/7/AEXQ1391-00_update.pdf