A New Snubber Is Now Used on Certain C18 Marine Engines {1274}
- Generator Set
- C18 MAR GENSET (S/N: SSW1-UP)
- C18 MARINE (S/N: JHL1-UP; DTP1-UP)
- Marine Engine
- C18 (S/N: TNA1-UP; GTB1-UP; T2R1-UP; GEX1-UP)
Description Of Change: The new snubber protects the fuel pressure sensor against pressure spikes.
Adaptable To: The new 490-0100 Snubber replaces the former 419-3604 Snubber.
The new snubber is adaptable to the above engines back to first production.
This change is effective for the serial numbers listed in Table 1.
Show/hide table
Effective Serial Numbers |
---|
S/N:DTP00449-UP |
S/N:GEX05163-UP |
S/N:GTB05104-UP |
S/N:JHL00712-UP |
S/N:SSW00103-UP |
S/N:T2R05353-UP |
S/N:TNA05165-UP |
Caterpillar Information System:
C13 and C15 Engines for Combat and Tactical Vehicles Engine Temperature Sensor Open or Short Circuit - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Line Heater - Test
No Fault Found for 379-0150 Fuel Injection Pump Gp for C9.3 Engines {1251} No Fault Found for 379-0150 Fuel Injection Pump Gp for C9.3 Engines {1251}
G3508J, G3516J, and G3520J Engines Engine Oil Filter Housing - Assemble
C3.3B and C3.8 Engines for Caterpillar Built Machines SCR Catalyst Has Incorrect Inlet Temperature
G3508J, G3516J, and G3520J Engines Engine Oil Filter Housing - Disassemble
C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Tank Temperature Is Low
G3508J, G3516J, and G3520J Engines Engine Oil Cooler - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil Cooler - Disassemble
G3508J, G3516J, and G3520J Engines Engine Oil Pump - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil Pump - Disassemble
G3508J, G3516J, and G3520J Engines Auxiliary Water Pump - Assemble
G3612 and G3616 Engines Water Pump Seal - Remove
C1.7 and C2.2 Industrial Engines Fuel System Secondary Filter - Replace
G3612 and G3616 Engines Water Pump Seal - Install
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490} Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
725C2 Articulated Truck Product Identification Number
A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059} A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059}
2015/09/23 A Procedure for Piston and Piston Pin Break-In for Certain C18 Engines is Now Available {1225}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System General Information
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Remove
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Disassemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Install