2015/09/18 Caterpillar


A Guide to Reman Product Markings is Now Available {7754}

Usage:

D3400 01T
Caterpillar Products:
  • All
  • Dealers regularly submit DSN and Parts Tech inquiries to the Product Support Customer Relations Manager (PSCRM) asking for assistance with locating, identifying, and deciphering Reman product markings.

    Special Instruction, REHS9716, "A Guide to Reman Product Markings" is now available to aid in identifying Reman product markings.

    Caterpillar Information System:

    2015/09/17 A Guide to Reman Product Markings is Now Available {7754}
    2015/09/15 A Guide to Reman Product Markings is Now Available {7754}
    2015/09/17 Cat® Reman Announces Additions to Sea Water Pump Portfolios {1371}
    C1.7 and C2.2 Industrial Engine Oil Contains Fuel
    SRMP Electric Power Generation SRMP Generator Rotor - Remove and Install
    3516B Generator Set Engines with Dynamic Gas Blending Injector Solenoid - Test
    C1.7 and C2.2 Industrial Engine Engine Top Speed Is Not Obtained
    EMCP4.2B Custom Event Is Not Present
    EMCP4.2B Diagnostic Capabilities
    EMCP4.2B Service Tools
    EMCP4.2B General Information
    EMCP4.2B Monitoring Software for Computer
    2015/09/17 A Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As is Available {1156}
    2015/09/18 A Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As is Available {1156}
    2015/09/18 The Required Parts for Installing Turbochargers on Certain 2007 On-Highway Truck Engines Is Published {1052}
    390F Excavator Stopping the Engine
    C13 Generator Set Maintenance Interval Schedule - Prime Power
    C13 Generator Set Maintenance Interval Schedule - Standby
    SRMP Electric Power Generation SRMP Generator Exciter - Remove and Install
    C13 Generator Set Maintenance Interval Schedule - Emergency Standby Power
    EMCP 4.4 Supervisory Control Panel Maintenance Interval Schedule
    2015/09/17 New Software Is Used for Certain 3500 Dynamic Gas Blending Well Service Engines {1250, 1280, 1920}
    New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920} New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920}
    New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393} New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.