SRMP Electric Power Generation SRMP Generator Caterpillar


Terminal Box - Remove and Install

Usage:

C18 SSM

Removal Procedure



    Illustration 1g03888668

  1. Remove terminal box top panel (2). Use two people to remove panel (1). Remove panel (3). Repeat for other side.


    Illustration 2g03888974

  2. Remove panel (5). Remove panel (4).


    Illustration 3g03889035

  3. Use two people to remove terminal box frame (6).

Installation Procedure

  1. Install terminal box frame (6) in the reverse order of removal.

Caterpillar Information System:

C175-16 Locomotive Engine Data Link - Test
C175-16 Locomotive Engine Coolant Temperature Control Module - Test
C175-16 Locomotive Engine Coolant Pressure Is Low
3516E Generator Set Engine Cat ET Service Features
C1.7 and C2.2 Industrial Engine Alternator Problem
C1.7 and C2.2 Industrial Engine Diagnostic Trouble Codes
EMCP4.2B Utility Circuit Breaker Failure to Open Circuit Fault
C1.7 and C2.2 Industrial Engine Electrical Connectors
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Seal - Remove and Install - Pony Rod Seal
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Pinion Shaft - Remove and Install
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Crankshaft - Remove and Install
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Gear (Bull) - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Crankcase Breather
EMCP4.2B Utility Circuit Breaker Failure to Close Circuit Fault
Shutoff Valve Leaking on Engine Oil Pan on Certain C4.4 Engines{1307} Shutoff Valve Leaking on Engine Oil Pan on Certain C4.4 Engines{1307}
C1.7 and C2.2 Industrial Engine Engine Does Not Crank
EMCP4.2B General Information
EMCP4.2B Component Location
EMCP4.2B Electronic Control Module (Generator Set)
EMCP4.2B Data Link
EMCP4.2B Electronic Control Module (Engine)
EMCP4.2B MUI Engine Monitoring and Control
EMCP4.2B System Operation
EMCP4.2B Password Entry
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.