740 GC, 740 Ejector, 745 Articulated Truck Power Train Caterpillar


Speed Sensor (Transmission) - Remove and Install

Usage:

745 3F6

拆卸步骤

开始:

  1. 倾斜驾驶室。


注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。




    图 1g03865473
    位于变速箱右后部。

  1. 断开线束组件,并拆下螺栓和垫圈。

  2. 拆下变速箱转速传感器 (1) 和 O 形密封圈。

安装步骤

  1. 按与拆卸相反的顺序安装变速箱转速传感器 (1)。

    1. 利用所密封的润滑剂轻轻润滑孔。

    2. 拧紧变速箱转速传感器 (1) 的螺栓至扭矩为 14 ± 3 N·m (124 ± 27 lb in)

Caterpillar Information System:

415F2 Industrial Loader Maintenance Interval Schedule
740 GC, 740 Ejector, 745 Articulated Truck Machine System Front Suspension Cylinder - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Rear Axle - Remove and Install
C3.4B Engines ECM Software - Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
CCS7 Combination Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
773E Off-Highway Truck Hydraulic System Control Valve (Hoist)
New Onboard Radio Wiring Group Now Available on CAT Command for Underground Equipped Machines {1408, 733T} New Onboard Radio Wiring Group Now Available on CAT Command for Underground Equipped Machines {1408, 733T}
CCS7 Combination Vibratory Compactors Machine Systems Metering Pump (Steering) - Remove and Install
MH3037 Material Handler Stopping the Engine
2015/07/20 New Clamps are now Used in the Water Lines Group on Certain 14M Motor Graders {1380}
2015/09/11 Improved Seals are Now Used in the Hoist Valve on Certain Off-Highway Trucks {5051}
SE34 V and SE34 VT Asphalt Screeds Safety Messages
SE34 V and SE34 VT Asphalt Screeds Specifications
SE34 V and SE34 VT Asphalt Screeds Plate Locations and Film Locations
AP500F Asphalt Paver Propel System Relief Valve (Charge) - Test and Adjust - Left Propel
994K Wheel Loader Machine Systems Transmission Planetary
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission Hydraulic Control Valve - Remove and Install
Updated LSI Installation And Calibration Procedure On Certain Telehandlers {1408, 1439} Updated LSI Installation And Calibration Procedure On Certain Telehandlers {1408, 1439}
R1600G Underground Load Haul Dump Machine Repower With C11 Engine {1000, 7000} R1600G Underground Load Haul Dump Machine Repower With C11 Engine {1000, 7000}
SE34 V and SE34 VT Asphalt Screeds Thickness Control Screw Adjustment
415F2 Industrial Loader Monitoring System
SE34 V and SE34 VT Asphalt Screeds Lifting and Tying Down the Machine
415F2 Industrial Loader Towing the Machine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.