794 AC Off-Highway Truck Field Assembly Caterpillar


Lighting - Install

Usage:

794 AC HRT

Parts and Specification Information



Illustration 1g03863682

Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.

Table 1
Item  Part Number  Description  Qty  Specification  Approximate Weight 
442-3623  Bracket As     
5S-7383  Bolt     
8T-4896  Hard Washer  16     
3K-6060  Locknut     
135-0428  Signal Lamp Gp     
5C-9553  Bolt  12     
9X-8256  Washer  12     
344-5673  Nut  12     

Installation Procedure



    Illustration 2g03863695
    View of the right-hand side lights

  1. Install bracket assembly (1) to the handrail group using four bolts (2), eight hard washers (3), and four locknuts (4).

  2. Install two signal lamp groups (5) to the bracket assembly (1) using six bolts (6), six washers (7), six nuts (8). Connect the wiring to the existing wire harness.

  3. Repeat Steps 1 and 2 for left-hand side lights.

Caterpillar Information System:

G3606 and G3608 Engines Housing (Front) - Remove and Install
794 AC Off-Highway Truck Field Assembly Air Conditioner Lines - Install
XQ2000 Power Module Product Description
3516E Generator Set Maintenance Interval Schedule - Standby
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801} Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
352F Excavator Safety Messages
352F Excavator Lifting Capacities
352F Excavator Specifications - Long Reach Configuration
C280 Marine Engines Camshaft Timing
HPU300 Hydraulic Power Pack Lifting and Tying Down
2015/07/10 An Improved Alternator Mounting Group Is Now Used On Certain C15 And C18 Engines {1405}
463-3475 Well Stimulation Pump Crankshaft Lifting Device{0374, 0599, 0632, 0700, 1202} 463-3475 Well Stimulation Pump Crankshaft Lifting Device{0374, 0599, 0632, 0700, 1202}
336F and 340F Excavators Machine System Specifications Cylinder Guard
G3606 and G3608 Engines Camshaft - Remove
3516E Generator Set Safety Messages
3516E Generator Set Configuration Parameters
3516E Generator Set Product Lifting
3516E Generator Set Engine Oil Level - Check
3516E Generator Set Plate Locations and Film Locations
794 AC Off-Highway Truck Field Assembly Tire and Rim - Install
120 and 120 AWD Motor Grader Engine Shutdown Switch - Check
Improved Alternator Mounting Groups Are Now Used on Certain C18 Engines {1405} Improved Alternator Mounting Groups Are Now Used on Certain C18 Engines {1405}
794 AC Off-Highway Truck Field Assembly Body and Canopy - Install
2015/08/21 New Harness Routing Used For Certain G3516H Engines {1408}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.