Time - Set
The correct date and time for the Machine Security System must be set. Use the following procedure to set the date and time.
Note: Changing the time on the MSS clock requires a key with the master access level or a factory password.
- Connect the Cat ® ET to the service connector via the communication adapter.
- Place the Master Access Level Key into the key start switch and turn the key to the ON position.
- Start the Cat ® ET.
- Click on the "Connect" icon in the menu bar of the Cat ®ET.
- Once the Cat ® ET has established communications with the MSS3s ECM, select the "ECM date/time" option from the "Service" menu. This selection will cause the Cat ET to display the following screen.
Show/hide table
Illustration 1 g03866350 Date and Time - Press the "Change" button. This button will launch the "Date and Time" dialog box.
Show/hide table
Illustration 2 g03866585 Time Zone - Select the local time zone from the drop-down list.
Show/hide table
Illustration 3 g03866589 Local Date and Time - Enter the local date and time. Use an accurate reference to set the time.
Note: Laptop clocks are not accurate and may have a different time than the local time.
Show/hide tableIllustration 4 g03866592 ET Display - Then press the "OK" button. The Cat ET will display the following message.
Show/hide table
Illustration 5 g03866593 Cat ET Time Confirmation - Click on the "Yes" button in order to change the date and time or click on the "No" button in order to cancel the change. The Cat ET will display the new time on a 24 hour clock.
Show/hide table
Illustration 6 | g03866595 |
Cat ET Display 24 Hour Clock |
Caterpillar Information System:
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Piston Pump (Main Hydraulic) - Disassemble
MSS3s Machine Security System Factory Password - Obtain
MSS3s Machine Security System System Disarm - Program - Security System Bypass
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
AP500F Asphalt Paver Propel System Piston Pump Flow - Test
Pipelayer Counterweight Frame Concentric Pins (Inspect, Remove, Install, and Torque the Locking Ring Assembly){7052} Pipelayer Counterweight Frame Concentric Pins (Inspect, Remove, Install, and Torque the Locking Ring Assembly){7052}
MSS3s Machine Security System Key - Program
A Procedure to Install a Grease Adapter Guard on Certain 773E Off-Highway Trucks is Now Available {0372, 0374, 1000, 1003, 3101} A Procedure to Install a Grease Adapter Guard on Certain 773E Off-Highway Trucks is Now Available {0372, 0374, 1000, 1003, 3101}
MSS3s Machine Security System Product Identification Number - Program
MSS3s Machine Security System General Information
2015/07/10 An Improved Alternator Mounting Group Is Now Used On Certain C15 And C18 Engines {1405}
C175-16 and C175-20 Engines for Off-Highway Trucks Engine Mount
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Piston Pump (Main Hydraulic) - Assemble
MSS3s Machine Security System System Schematic
CP44B and CS44B Vibratory Soil Compactors Machine Systems Eccentric Weight Housing - Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Refrigerant Receiver-Dryer - Remove and Install
Procedure to Install a Grease Adapter Guard on Certain 773E Off-Highway Trucks {0679, 3260, 7200, 7510, 7516, 7540} Procedure to Install a Grease Adapter Guard on Certain 773E Off-Highway Trucks {0679, 3260, 7200, 7510, 7516, 7540}
New Drum Pulleys Are Now Used on Certain Cold Planers {5160} New Drum Pulleys Are Now Used on Certain Cold Planers {5160}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Refrigerant Condenser - Remove and Install
558 Forest Machine Machine Systems Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
Installation Of The 482-0240 KIT-TANK DOOR On Certain Compact Track Loaders And Skid Steer Loaders {7315} Installation Of The 482-0240 KIT-TANK DOOR On Certain Compact Track Loaders And Skid Steer Loaders {7315}
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Troubleshooting
2015/07/13 New Procedure For Checking Hydraulic Oil Level On Series C Telehandlers {5056}
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Check Valve Line