MSS3s Machine Security System Caterpillar


Lost Key (MSS)

Usage:

120G 11W

Lost Key (MSS3S)

  1. Use another valid key to start the machine.

  2. Program another key into the control module. Refer to the Testing and Adjusting, "Key - Program" section of this manual for additional information.

  3. Contact your Caterpillar dealer.

Note: If a key is lost, the key should be deleted from the list of authorized keys.

Caterpillar Information System:

MSS3s Machine Security System Emerging Symptom Information
MSS3s Machine Security System Symptom Troubleshooting
MSS3s Machine Security System Service Tools
MSS3s Machine Security System General Information
MSS3s Machine Security System System Components
MSS3s Machine Security System Electronic Control Module (ECM)
MSS3s Machine Security System Service Operation Using Service Tool
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Remove
MSS3s Machine Security System Service Operation Using Machine Security System
MSS3s Machine Security System Protected Functions
MSS3s Machine Security System Events
MSS3s Machine Security System Diagnostic Operation
2015/07/28 A New Bracket is Now Used on The Door Latch Assembly of Certain M, M Series 2, and M Series 3 Motor Graders {7308}
MSS3s Machine Security System Engine Does Not Crank and Status Indicator Is Green
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Bucket Cylinder
A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920} A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920}
2015/07/27 Improved Check Valves Are Now Used On Certain Motor Graders {5051}
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Drive Shaft - Remove and Install
MD6200 Rotary Drill Mast Operation
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1091, 1251, 1254, 1290, 1713}
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {1050, 108D, 1210, 1251, 1254, 1290, 1405, 1713}
R2900G Load Haul Dump Cab Air Filter - Clean/Replace - If Equipped
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.