2015/07/23 Caterpillar


Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}

Usage:

826K 232
Landfill Compactor:
826K (S/N: SET1-UP; 2321-UP)
Soil Compactor:
825K (S/N: SEE1-UP; 2331-UP)
Off-Highway Truck:
770 (S/N: BZZ1-UP)
770G (S/N: RMA1-UP; TWA1-UP; KDH1-UP; ECM1-UP; ECX1-UP)
772 (S/N: RLB1-UP)
772G (S/N: LTS1-UP; KEX1-UP; LTX1-UP)
773F (S/N: EED1-UP; EXD1-UP)
777F (S/N: JRP1-UP; JXP1-UP)
777G (S/N: T5A1-UP; TNM1-UP; RDR1-UP; T4Y1-UP; GT71-UP)
785G (S/N: RTL1-UP)
789D (S/N: SPD1-UP; SHH1-UP; TWP1-UP)
793F (S/N: EMD1-UP; SND1-UP; SSP1-UP; SXP1-UP; RBT1-UP)
795F (S/N: ERM1-UP; SNT1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)
CAT MT4400D AC (S/N: MH41-UP; MT41-UP)
CAT MT5300D AC (S/N: MN51-UP; MT51-UP)
OEM POWERTRAIN (S/N: DTE1-UP)
Quarry Truck:
773G (S/N: MWH1-UP; JWS1-UP; T5S1-UP; T5T1-UP)
775F (S/N: EYG1-UP; DLS1-UP)
775G (S/N: T5F1-UP; RFM1-UP; MJS1-UP; T5W1-UP)
Track-Type Loader:
953D (S/N: LBP1-UP)
963D (S/N: LCS1-UP)
Underground Articulated Truck:
AD30 (S/N: DXR1-UP; GXR1-UP)
AD45B (S/N: CXM1-UP)
AD55 (S/N: DNW1-UP)
AD55B (S/N: JNW1-UP)
AD60 (S/N: KNW1-UP)
Wheel Dozer:
824K (S/N: RWB1-UP; 2341-UP)
834K (S/N: LWY1-UP; TWY1-UP)
844K (S/N: KLS1-UP)
854K (S/N: H9K1-UP; H8M1-UP)
Wheel Loader:
924K (S/N: ENC1-UP; HJF1-UP; PWR1-UP)
930K (S/N: DYB1-UP; EYE1-UP; RHN1-UP)
938K (S/N: SWL1-UP; XXT1-UP; HFW1-UP)
950M (S/N: EMB1-UP; XCJ1-UP; FTR1-UP)
962M (S/N: EJB1-UP; JYD1-UP; LSE1-UP; F2T1-UP)
966K (S/N: PBG1-UP; TFS1-UP; NGX1-UP)
966MSeries XE (S/N: P6C1-UP)
966M (S/N: DYC1-UP; KJP1-UP)
972K (S/N: PEM1-UP; Z4W1-UP)
972MSeries XE (S/N: EDW1-UP)
972M (S/N: A8P1-UP; JPR1-UP)
980K (S/N: W7K1-UP; NEP1-UP; GTZ1-UP)
980M (S/N: KRS1-UP; N8T1-UP)
982M (S/N: F9A1-UP; K1Y1-UP)
988K (S/N: LWX1-UP; TWX1-UP)
990K (S/N: DJK1-UP; A9P1-UP)
992K (S/N: ZMX1-UP; 8801-UP)
993K (S/N: LWA1-UP; Z4D1-UP; Z9K1-UP; Z4Z1-UP)
994H (S/N: DWC1-UP)
994K (S/N: MRK1-UP)

An improved lines group routing for the seat suspension is now available for the machines listed above. A new zip-tie has been added to the air lines group to prevent movement of the hose away from the bolt end. The changes will improve the service life of the hoses in the air lines group.




Illustration 1g03866557




Illustration 2g03866556

Use new zip-tie (A) to secure both air lines (B) and wire harness (C) .

An improved lines group routing for the seat suspension is now available to all machines that are listed above.

Caterpillar Information System:

Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
C280-08 Tier 4 Engine Turbocharger - Assemble
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C3.4B Engines Component Location
C3.4B Engines General Information
349F and 352F Excavators Machine System Specifications Front Lines
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
3512C Generator Set Engine Engine Speed Sensor - Remove and Install
XQ400 Power Module Model View Illustrations
C8.7 Marine Engine Crankshaft Gear - Remove and Install
3512C Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
3512C Generator Set Engine Air Inlet Manifold - Remove and Install
794 AC Off-Highway Truck Field Assembly Brakes - Install
3512C Generator Set Engine Rocker Shaft and Pushrod - Install
G3606 and G3608 Engines Gear Group (Rear) - Remove and Install
XQ400 Power Module Coolant Level - Check
XQ400 Power Module Fan Drive Bearing - Lubricate
XQ400 Power Module Plate Locations and Film Locations
XQ400 Power Module Sensors and Electrical Components
Energy Storage System Rectifier Configuration
C280 Marine Engines Air Inlet and Exhaust System Operation - Aftertreatment
HPU300 Hydraulic Power Pack Transport Information
New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620} New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.