C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Fuel Priming Pump and Primary Fuel Filter

Usage:

826K 2L3


图 1g03408136

表 1
技术规格,用于 213-4740 燃油注油泵和油水分离器 
项目  数量  零件  技术规格说明 
212-9580 油水分离器和燃油滤清器总成  拧紧,直至落座,然后再拧紧 3/4 圈。 
343-5527 油杯  使用以下步骤:
1. 从滤清器总成的底部拆下盖。
2. 从盖的下面拆下密封件,然后弃置盖。
3. 用机油润滑密封件,然后将其重新安装到油杯组件的槽中。
4. 将油杯组件安装到滤清器总成底部的螺纹上。
5. 拧紧油杯至扭矩为 10 N·m (89 lb in)。 

Caterpillar Information System:

3512C Generator Set Engine Engine Speed Sensor - Remove and Install
XQ400 Power Module Model View Illustrations
C8.7 Marine Engine Crankshaft Gear - Remove and Install
3512C Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
3512C Generator Set Engine Crankcase Pressure Sensor - Remove and Install
XQ400 Power Module Safety Messages
2015/09/04 A New Breather Hose Is Now Used on Certain 3512 Engines {1317}
C8.7 Marine Engine Crankshaft Pulley - Remove and Install
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000} Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
3512C Generator Set Engine Engine Speed/Timing Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Disassemble
794 AC Off-Highway Truck Field Assembly Mirror - Install
349F and 352F Excavators Machine System Specifications Front Lines
C3.4B Engines General Information
C3.4B Engines Component Location
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Assemble
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
2015/07/23 Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}
3512C Generator Set Engine Air Inlet Manifold - Remove and Install
794 AC Off-Highway Truck Field Assembly Brakes - Install
3512C Generator Set Engine Rocker Shaft and Pushrod - Install
G3606 and G3608 Engines Gear Group (Rear) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.