Machine Security System (MSS3i) Integrated Caterpillar


Electronic Control Module (ECM)

Usage:

725C2 2L6


Illustration 1g00785019
Electronic Control Module (ECM)

The Machine Security System (MSS) is an integrated feature for the machine ECM. The MSS software and components are integrated into an ECM that controls other machine functions. The system may utilize up to 255 electronic keys.

Note: The system will be limited to 50 keys on older machines. This limitation is due to software limitations on the Machine ECM that utilizes a version of software that does not support the larger key storage.

ECM Inputs

Keyswitch

The key start switch is also used as an input signal to the MSS. The input from the key switch is used to determine when the machine is on. Battery voltage is connected to this input through the ON and START positions of the keyswitch. See Table 1 for input voltages.

Table 1
Input Voltage  12V System  24V System 
Machine is operating and the alternator is charging.  14.1 - 15.1V  27.6 - 29.6V 
Machine is not running.  12V  24V 

ECM Outputs

Status Indicator

The status indicator displays status of the system. The status indicator has three connections. One of the three connections is for a ground. Another connection is for the red LED. The third connection is for the green LED.

Caterpillar Information System:

Machine Security System (MSS3i) Integrated Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated Protected Functions
Machine Security System (MSS3i) Integrated Diagnostic Operation
Machine Security System (MSS3i) Integrated Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated Key Information
120 and 120 AWD Motor Grader Engine Shutdown Switch
3512C Generator Set Engine Engine Oil Filter Housing - Disassemble
Machine Security System (MSS3i) Integrated Operation of Status Indicator
Machine Security System (MSS3i) Integrated System Overview
120 and 120 AWD Motor Grader Battery Disconnect Switch
Machine Security System (MSS3i) Integrated General Information
120 and 120 AWD Motor Grader Mirror - If Equipped
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156} Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Machine Security System (MSS3i) Integrated System Components
Machine Security System (MSS3i) Integrated Data Link
Machine Security System (MSS3i) Integrated General Information
Machine Security System (MSS3i) Integrated Troubleshooting
Machine Security System (MSS3i) Integrated Key - Program
120 and 120 AWD Motor Grader Stopping the Engine if an Electrical Malfunction Occurs
Machine Security System (MSS3i) Integrated Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated Time - Set
Machine Security System (MSS3i) Integrated Factory Password - Obtain
Machine Security System (MSS3i) Integrated Configuration
Machine Security System (MSS3i) Integrated Machine Security System - Uninstall
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.