Axle Shaft - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
Start By:
- Remove the axle housing and the wheel flange.
- Drain the oil from the axle. Refer to Operation and Maintenance Manual, "Differential Oil - Change".
Show/hide table
Illustration 1 g01023934 - Remove axle shaft (1) from axle housing (2).
Show/hide table
Illustration 2 g01026864 - Remove seal (3). If necessary, remove bushing (4) from axle housing (2).
Show/hide table
Illustration 3 g01026866 - If necessary, remove the upper and lower bearing cups (5).
- Install axle shaft (1) in the reverse order of removal.
- Use Tooling (A) and install bearing cups (5), bushing (4), and seal (3).
Caterpillar Information System:
MH3037 Material Handler Engine Supplement Access Door - Remove and Install - Right
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Install
2015/06/10 New Remote Pendants Have Been Released For The Series F Pavers {5639, 7451}
Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377} Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377}
2015/07/13 A New Coolant Tank Group is Now Used on Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier {1063, 1353, 1354, 1377}
PL83 and PL87 Pipelayer Systems Track Roller Frame
PL83 and PL87 Pipelayer Systems Hard Bar
794 AC Off-Highway Truck Field Assembly Ladder - Install
16M Series 3 and 18M Series 3 Motor Graders System Schematic
16M Series 3 and 18M Series 3 Motor Graders Diagnostic Capabilities
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Steering System)
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Hydraulic System)
3412E Engine for 773E Off-Highway Trucks Timing - Calibrate
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Position Sensor (Steering) - Calibrate
3412E Engine for 773E Off-Highway Trucks Engine Shutdown Occurrence
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077} Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077}
2015/06/05 Cat® Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/06/05 An Improved Mirror Assembly Is Now Used on Certain 793F, 795F, and 797F Off-Highway Trucks {1408, 7319}
2015/06/10 A New O-Ring Seal is Now Used in the Rear Link Assembly on Certain 797 Off-Highway Trucks {7230}
2015/06/18 New Shipping Tires are Available for Certain Motor Graders {4200}
2015/06/12 A New Hose Is Now Used in the Air to Air After Cooler (ATAAC) Lines Group on Certain 795F Off-Highway Trucks {1063, 1071}
2015/08/03 A Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks is Available {4331, 5057, 5077}
Procedure to Improve the Cross Support for the Exhaust Tubes on Certain 797F Off-Highway Trucks{0635, 1061} Procedure to Improve the Cross Support for the Exhaust Tubes on Certain 797F Off-Highway Trucks{0635, 1061}