New Fuel Lines and Mounting Hardware Are Used On Certain 3500 Engines {1252}
- Engine:
- 3512C (S/N: NJT1-UP; F2X1-UP)
- Power Module:
- PM3516 (S/N: BPD1-UP)
- 3516B (S/N: FDN1-UP; 7RN1-UP; 2JW1-UP; S2Y1-UP; 6HZ1-UP)
Description of Change: The new fuel lines and mounting hardware used helps prevent fuel leak issues due to the use of bio-diesel fuel.
Adaptable To: Update the fuel lines and mounting hardware using the parts listed in Table 2.
Table 2 contains the effective serial numbers.
Reference Refer to Special Instruction, SEHS0124, "New Fuel Lines and Mounting Hardware Installation On Certain 3516B Engines" for installation instructions.
Show/hide table
Item     | Qty     | New Part Number     | Part Description     |
---|---|---|---|
1     | 2     | 0S-1588     | Bolts     |
2     | 1     | 0S-1590     | Bolt     |
3     | 1     | 0S-1594     | Bolt     |
4     | 1     | 115-8082     | Bracket As     |
5     | 1     | 144-8976     | Spacer     |
6     | 2     | 228-7091     | O-Ring Seals     |
7     | 2     | 238-5081     | O-Ring Seals     |
8     | 1     | 290-5562     | Mount     |
9     | 2     | 310-4947     | Clips     |
10     | 2     | 310-4948     | Clips     |
11     | 1     | 353-7952     | Grommet     |
12     | 2     | 3G-8047     | Grommets     |
13     | 1     | 478-0107     | Hose As     |
14     | 1     | 478-0108     | Hose As     |
15     | 1     | 480-5509     | Hose As     |
16     | 1     | 480-5510     | Hose As     |
17     | 1     | 480-5511     | Bracket     |
18     | 1     | 5B-9603     | Bolt     |
19     | 1     | 6V-8626     | Elbow     |
20     | 1     | 6V-9003     | Elbow     |
21     | 1     | 6V-9845     | Swivel Tee     |
22     | 2     | 7K-1181     | Cable Strap     |
23     | 1     | 8T-1897     | Clip     |
24     | 1     | 8T-1898     | Clip     |
25     | 2     | 9X-6458     | Hard Washers     |
26     | 2     | 9Y-6458     | Cover Gaskets     |
Show/hide table
Effective Serial Numbers     |
---|
S/N:2JW00423-UP     |
S/N:6HZ00341-UP     |
S/N:7RN02212-UP     |
S/N:FDN01784-UP     |
S/N:S2Y00119-UP     |
S/N:BPD01283-UP     |
S/N:F2X00365-UP     |
S/N:NJT00234-UP     |
Caterpillar Information System:
3412 Generator Set Electrical Power Supply - Test
C280-08 Tier 4 Engine Housing (Front) - Remove and Install
3412 Generator Set ECM/Personality Module - Test
2015/06/05 A New Prelubrication Oil Pump Is Used on Certain G3500 Engines {1319}
2015/07/07 New Piston and Liner Components Are Available For Certain G3516H Engines {1214, 1215, 1216, 1222, 1239}
2015/06/26 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
794 AC Off-Highway Truck Field Assembly Platform - Install
3516B Generator Set Engines with Dynamic Gas Blending Electronic Service Tool Does Not Communicate
C280-08 Tier 4 Engine Crankshaft Rear Gear - Remove and Install
G3606 and G3608 Engines Water Pump Seal - Remove
3516B Generator Set Engines with Dynamic Gas Blending High Altitude Derate Occurrence
3512C Generator Set Engine Exhaust Elbow - Remove and Install
2015/06/05 A New Damper Group Is Used on Certain C175 Petroleum Engines {1205}
G3606 and G3608 Engines Water Pump Seal - Install
3412 Generator Set Engine Speed - Test
797F Off-Highway Truck Field Assembly Tire and Rim (Front) - Install
797F Off-Highway Truck Field Assembly Tire and Rim (Rear) - Install
G3606 and G3608 Engines Water Manifold - Remove and Install
C4.4 and C7.1 Engines Intake Manifold Air Temperature Is High
Replacement Procedure For the Camshaft On the C8.7 Marine Engine{1210} Replacement Procedure For the Camshaft On the C8.7 Marine Engine{1210}
2015/06/05 Cat® Reman Now Offers Camshafts for Certain G3516H Engines {1210}
C280-08 Tier 4 Engine Housing (Rear) - Remove and Install
794 AC Off-Highway Truck Field Assembly Ladder - Install