3512C Generator Set Engine Caterpillar


Air Starting Motor - Remove and Install

Usage:

3512C LL9


Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Turn OFF the supply of pressurized air. Purge the pressurized air from the air lines and the air starting motor.

  2. Disconnect the harness assemblies and the air lines.


    Illustration 1g03839001

  3. Remove bolts (2) and air starting motor (1).

Installation Procedure

  1. Install air starting motor (1) in the reverse order of removal.

Caterpillar Information System:

3512C and 3516C Industrial Engines Exhaust Manifold
3516B Generator Set Engines with Dynamic Gas Blending Engine Shutdown Occurs Intermittently
3516B Generator Set Engines with Dynamic Gas Blending Engine Stalls at Low RPM
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Air Filter Element - Clean/Replace
2015/06/26 New Software Is Used on 3512C Engines in 6060 Hydraulic Shovels {1920}
2015/05/28 Cat Reman Announces the Addition of Power Train Components for Mining Trucks {3030, 3258, 4008, 4051, 4201, 4251, 4267}
C4.4 and C7.1 Engines Electrical Connectors
C4.4 and C7.1 Engines Component Location
3512C and 3516C Industrial Engines Air Inlet and Exhaust Lines
3524B and C175 Engines for Off-Highway Truck/Tractors Cylinder Block
G3606 and G3608 Engines Turbocharger - Install
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
3516C High Displacement Engine Cooling Fan Control - Test
3516B Generator Set Engines with Dynamic Gas Blending Fuel Consumption Is Excessive
3516C High Displacement Engine Electrical Power Supply - Test
Installation Procedure for the Prelubrication Oil Pump on Certain G3500 Engines{1319} Installation Procedure for the Prelubrication Oil Pump on Certain G3500 Engines{1319}
3512C Generator Set Engine Electronic Control Module (Engine) - Remove and Install
3512C Generator Set Engine Fuel Filter Housing - Remove and Install
794 AC Off-Highway Truck Field Assembly Fuel Tank - Install
3516C High Displacement Engine Ether Starting Aid - Test
G3606 and G3608 Engines Crankcase Cover - Remove and Install
3516C High Displacement Engine Sensor Signal (Analog, Active) - Test
3516C High Displacement Engine Sensor Signal (PWM) - Test
3516C High Displacement Engine Sensor Supply - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.