Component Location
Show/hide table
| |
| 图 1 | g03838794 |
|
电子控制电路图 | |
电子控制模块 (ECM) 和大部分发动机传感器位于发动机左侧。 对于 C4.4 发动机，参考图 2。 对于 C7.1 发动机，参考图 4。
有关 C7.1 发动机上连接的其余传感器，请参阅插图 6。
注: 在下图中，为清晰起见，部分部件已拆下。
Show/hide table
| |
| 图 2 | g03519477 |
|
C4.4 发动机左侧传感器位置 (1) 冷却液温度传感器 (2) 进气歧管压力传感器 (3) 高压燃油泵电磁阀 (4) 进气歧管空气温度传感器 (5) 燃油导轨压力传感器 (6) 电子控制模块 (ECM) (7) 主转速/正时传感器 (8) 机油压力传感器 (9) 辅助转速/正时传感器 | |
Show/hide table
| |
| 图 3 | g03519480 |
|
C4.4 发动机左侧传感器位置近视图 (1) 冷却液温度传感器 (2) 进气歧管压力传感器 (3) 高压燃油泵电磁阀 (4) 进气歧管空气温度传感器 (5) 燃油导轨压力传感器 (6) 电子控制模块 (ECM) (7) 主转速/正时传感器 (8) 机油压力传感器 (9) 辅助转速/正时传感器 | |
Show/hide table
| |
| 图 4 | g03338328 |
|
C7.1 发动机左侧传感器位置 (1) 冷却液温度传感器 (2) 高压燃油泵电磁阀 (3) 进气歧管压力传感器 (4) 进气歧管空气温度传感器 (5) 燃油导轨压力传感器 (6) 废气旁通阀调节器 (7) 主转速/正时传感器 (8) 机油压力传感器 (9) 电子控制模块 (ECM) | |
Show/hide table
| |
| 图 5 | g03338348 |
|
C7.1 发动机左侧传感器位置近视图 (1) 冷却液温度传感器 (2) 高压燃油泵电磁阀 (3) 进气歧管压力传感器 (4) 进气歧管空气温度传感器 (5) 燃油导轨压力传感器 (6) 废气旁通阀调节器 (7) 主转速/正时传感器 (8) 机油压力传感器 (9) 电子控制模块 (ECM) | |
Show/hide table
| |
| 图 6 | g03338385 |
|
C7.1 发动机右侧传感器位置 (10) 辅助转速/正时传感器 | |
Caterpillar Information System:
3512C and 3516C Industrial Engines Air Inlet and Exhaust Lines
3524B and C175 Engines for Off-Highway Truck/Tractors Cylinder Block
G3606 and G3608 Engines Turbocharger - Install
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
3516E Engines for 793D Off-Highway Trucks System Overview
3516E Engines for 793D Off-Highway Trucks Electronic Service Tools
C9.3 Marine Engine Housing (Front) - Remove and Install
C4.4 and C7.1 Engines General Information
C9.3 Marine Engine Fuel Filter Base - Remove and Install - Left-Hand Duplex
3512C and 3516C Industrial Engines Radiator
3512C and 3516C Industrial Engines Electronic Control Module
3512C and 3516C Industrial Engines Electronic Control Module
C4.4 and C7.1 Engines Electrical Connectors
2015/05/28 Cat Reman Announces the Addition of Power Train Components for Mining Trucks {3030, 3258, 4008, 4051, 4201, 4251, 4267}
2015/06/26 New Software Is Used on 3512C Engines in 6060 Hydraulic Shovels {1920}
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Air Filter Element - Clean/Replace
3516B Generator Set Engines with Dynamic Gas Blending Engine Stalls at Low RPM
3516B Generator Set Engines with Dynamic Gas Blending Engine Shutdown Occurs Intermittently
3512C and 3516C Industrial Engines Exhaust Manifold
3512C Generator Set Engine Air Starting Motor - Remove and Install
3516C High Displacement Engine Cooling Fan Control - Test
3516B Generator Set Engines with Dynamic Gas Blending Fuel Consumption Is Excessive
3516C High Displacement Engine Electrical Power Supply - Test
Installation Procedure for the Prelubrication Oil Pump on Certain G3500 Engines{1319} Installation Procedure for the Prelubrication Oil Pump on Certain G3500 Engines{1319}