3512C and 3516C Industrial Engines Caterpillar


Electronic Control Module

Usage:

3512C MLM



Illustration 1g03838223

Table 1
Specification for 348-2387 Engine Electronic Control Gp    
Item     Qty     Part     Specification Description    
-     -     Before assembly, apply Loctite 5900 Flange sealant to the cast connector mounting surfaces.    
1     1     184-2472 Screw     Torque to
2.50 ± 0.25 N·m (22.13 ± 2.21 lb in).    
2     20     184-2471 Screw     Torque to
2.50 ± 0.25 N·m (22.13 ± 2.21 lb in).    
3     8     184-2469 Screw     Torque to
2.50 ± 0.25 N·m (22.13 ± 2.21 lb in).    
4     1     184-2470 Screw     Torque to
2.50 ± 0.25 N·m (22.13 ± 2.21 lb in).    
C     -     -     Before assembly, apply Loctite 5900 Flange sealant to the housing within the area shown.    

Caterpillar Information System:

352F OEM Excavator Based Specialty Solutions Before Operation
PM3516 Power Modules Fire Prevention and Explosion Prevention
C3.3B and C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter Regeneration Does Not Occur
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200} Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
C9.3 Marine Engine Air Starting Motor - Remove and Install
New Bellow Assemblies Are Used on Certain 3612 and C280-12 Marine and Petroleum Engines {1059, 1061} New Bellow Assemblies Are Used on Certain 3612 and C280-12 Marine and Petroleum Engines {1059, 1061}
3512C and 3516C Industrial Engines Jacket Water Heater Mount
3512E Engines for Well Stimulation Pumps Exhaust Elbow
3500B Engines for Caterpillar Built Power Modules Alternator Mounting
C7 and C9 Industrial Engines Intake Manifold Air Temperature Is High
C7 and C9 Industrial Engines Fuel Pressure Is Low
G3606 and G3608 Engines Turbocharger - Remove
3512C and 3516C Industrial Engines Electronic Control Module
3512C and 3516C Industrial Engines Radiator
C9.3 Marine Engine Fuel Filter Base - Remove and Install - Left-Hand Duplex
C4.4 and C7.1 Engines General Information
C9.3 Marine Engine Housing (Front) - Remove and Install
3516E Engines for 793D Off-Highway Trucks Electronic Service Tools
3516E Engines for 793D Off-Highway Trucks System Overview
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
G3606 and G3608 Engines Turbocharger - Install
3524B and C175 Engines for Off-Highway Truck/Tractors Cylinder Block
3512C and 3516C Industrial Engines Air Inlet and Exhaust Lines
C4.4 and C7.1 Engines Component Location
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.