C7 and C9 Industrial Engines Caterpillar


Component Location

Usage:

C7 JRA


Illustration 1g01120750
Component locations
(1) Engine coolant temperature sensor
(2) Connector for the injection actuation pressure control valve
(3) Air inlet heater relay
(4) Injection actuation pressure sensor
(5) Boost pressure sensor
(6) Intake manifold air temperature sensor
(7) Connector for the injector solenoid harness
(8) Atmospheric pressure sensor
(9) Ground stud
(10) Service tool connector
(11) J61 Customer connector
(12) Optional 194-1091 Electronic Control Wiring Gp
(13) Connector for engine timing calibration
(14) J2/P2 connector
(15) J1/P1 connector
(16) Primary engine speed/timing sensor
(17) Secondary engine speed/timing sensor
(18) Engine oil pressure sensor


Illustration 2g01120762
The location of the fuel pressure sensor depends on the engine configuration.
(19) Fuel pressure sensor

Caterpillar Information System:

C9.3 Marine Engine Heat Exchanger - Remove and Install
PM820, PM822, and PM825 Cold Planer Track Tension - Check/Adjust
G3606 and G3608 Engines Aftercooler - Assemble
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 12V Electric
C2.2 Engines For Caterpillar Built Machines Sensor Supply - Test
C9.3 Marine Engine Electric Starting Motor - Remove and Install - Dual Start - 24V Electric and Air Start
3406E Engine Cylinder Head - Install
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 24V Electric
PM820, PM822, and PM825 Cold Planer Machine Interlocks
3512C and 3516C Industrial Engines Water Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
C7 and C9 Industrial Engines Configuration Parameters
C7 and C9 Industrial Engines Coolant Temperature Is High
C7 and C9 Industrial Engines Fuel Pressure Is High
G3606 and G3608 Engines Turbocharger - Remove
C7 and C9 Industrial Engines Fuel Pressure Is Low
C7 and C9 Industrial Engines Intake Manifold Air Temperature Is High
3500B Engines for Caterpillar Built Power Modules Alternator Mounting
3512E Engines for Well Stimulation Pumps Exhaust Elbow
3512C and 3516C Industrial Engines Jacket Water Heater Mount
New Bellow Assemblies Are Used on Certain 3612 and C280-12 Marine and Petroleum Engines {1059, 1061} New Bellow Assemblies Are Used on Certain 3612 and C280-12 Marine and Petroleum Engines {1059, 1061}
C9.3 Marine Engine Air Starting Motor - Remove and Install
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200} Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.