C9.3 Marine Engine Caterpillar


Engine Oil Pressure Sensor - Remove and Install

Usage:

C9.3 C93

Removal Procedure



    Illustration 1g03836785
    Typical example.

  1. Disconnect harness assembly (2) and engine oil pressure sensor (1).

Installation Procedure

  1. Install engine oil pressure sensor (1) in the reverse order of removal.

    1. Tighten engine oil pressure sensor (1) to a torque of 10 ± 2 N·m (89 ± 18 lb in).

Caterpillar Information System:

3516E Generator Set Engine Sensor Calibration Required - Test
C9.3 Marine Engine Coolant Temperature Sensor - Remove and Install
G3606 and G3608 Engines Aftercooler - Disassemble
3512C and 3516C Industrial Engines Air Lines
C280 Marine Engines Circuit Breaker - Test
3512C and 3516C Industrial Engines Engine Oil Filter
3500 Industrial Engines Fuel Injector Mechanism
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490} Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Left-Hand Service Oil
3516B Generator Set Engines with Dynamic Gas Blending Exhaust System Contains Oil
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Combined Circuit Keel Cooling
C280-08 Tier 4 Engine Exhaust Manifold Shield - Remove and Install
C280-08 Tier 4 Engine Exhaust Manifold - Remove and Install
C280-08 Tier 4 Engine Aftercooler - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Remove and Install
C280-08 Tier 4 Engine Air Inlet Shutoff - Remove and Install
C9.3 Marine Engine Fuel Pressure Sensor - Remove and Install
C9.3 Marine Engine Speed/Timing Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Relay - Test - ECM Main Relay
C9.3 Marine Engine Inlet Manifold Temperature Sensor - Remove and Install
C9.3 Marine Engine Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Marine Engine Belt Tensioner - Remove and Install
C9.3 Marine Engine Engine Control Module - Remove and Install
3512C and 3516C Industrial Engines Air Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.