An Improved Housing for the Throttle Inlet Is Used on Certain G3500 Engines {1071}
- Engine:
- G3516C (S/N: GSB1-UP)
- Power Module:
- PMG3516 (S/N: JKK1-UP)
- G3516C SI TA (S/N: TJB1-UP)
- G3516C (S/N: GZC1-UP)
- G3516C TA DI (S/N: TJC1-UP)
- G3516C (S/N: F6D1-UP; F6E1-UP; F6F1-UP; F6M1-UP; GZZ1-UP)
- G3516E (S/N: F6G1-UP; GAS1-UP; SLY1-UP)
- G3520C (S/N: GZA1-UP)
- G3520C SI TA (S/N: HEB1-UP)
- G3520C (S/N: MAD1-UP; GZJ1-UP; GZK1-UP; GZL1-UP; GZM1-UP; B9P1-UP; HAT1-UP)
- G3520C SI TA (S/N: CWY1-UP)
- G3520E (S/N: GZG1-UP; GZH1-UP; HAL1-UP; SXY1-UP)
Description of Change: The improved housing offers greater strength and vibration resistance.
Adaptable To: The improvement has been made to the 360-0416 Housing and the 367-3918 Housing. The improved housings are adaptable back to first production on the serial numbers listed above.
Note: Determine which of the two improved housings will be needed for the application.
Show/hide table
Illustration 1 | g03839216 |
Top view of engine (1) 360-9687 Gasket (2) 360-7990 Gasket (3) Housing |
Refer to Table 1 for a list of part numbers needed to install the new Housing.
Show/hide table
New Part Number     | Description     | Quantity     |
360-0416 Or 367-3918     |
Housing     | 1     |
360-9687     | Gasket     | 2     |
360-7990     | Gasket     | 1     |
Show/hide table
Effective Serial Numbers     |
S/N:F6D00121-UP     |
S/N:F6E00104-UP     |
S/N:F6F00124-UP     |
S/N:F6M00158-UP     |
S/N:GSB00128-UP     |
S/N:GZC00265-UP     |
S/N:GZZ00363-UP     |
S/N:TJB00110-UP     |
S/N:TJC00820-UP     |
S/N:F6G00107-UP     |
S/N:GAS00281-UP     |
S/N:SLY00110-UP     |
S/N:B9P00206-UP     |
S/N:CWY00222-UP     |
S/N:GZA00306-UP     |
S/N:GZJ00701-UP     |
S/N:GZK00184-UP     |
S/N:GZL00149-UP     |
S/N:GZM00222-UP     |
S/N:HAT00212-UP     |
S/N:HEB00105-UP     |
S/N:MAD00202-UP     |
S/N:GZG00112-UP     |
S/N:GZH00168-UP     |
S/N:HAL00103-UP     |
S/N:SXY00103-UP     |
S/N:JKK00326-UP     |
Caterpillar Information System:
12M Motor Grader Wheel Lean Bearings - Lubricate
3500B High Displacement Locomotive Engines Fuel Injector Mechanism
C9.3 Marine Engine Cylinder Head - Remove and Install
PM820, PM822, and PM825 Cold Planer Lifting and Tying Down the Machine - Fixed Conveyor
3600 Distillate Fuel Engines Maintenance Interval Schedule
C9.3 Marine Engine Valve Mechanism Cover - Remove and Install
C9.3 Marine Engine Cylinder Block Cover - Remove and Install
3500 Engines Housing (Front)
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
3406E Engine Cylinder Head - Install
The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269} The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269}
C27 and C32 Engine for MD6250 and MD6310 Drill Coolant Level - Test
3500 Generator Sets with Dynamic Gas Blending Generator Bearing - Inspect
2015/08/14 A New Control Valve Assembly for Fuel Is Used on Certain 3500 Marine Engines {1261}
3500 Generator Sets with Dynamic Gas Blending Generator Bearing - Replace
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Right-Hand Service
C280-08 Tier 4 Engine Exhaust Manifold Shield - Remove and Install
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Combined Circuit Keel Cooling
3516B Generator Set Engines with Dynamic Gas Blending Exhaust System Contains Oil
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Left-Hand Service Oil
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490} Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
3500 Industrial Engines Fuel Injector Mechanism
3512C and 3516C Industrial Engines Engine Oil Filter
C280 Marine Engines Circuit Breaker - Test