12M Motor Grader Caterpillar


Wheel Lean Bearings - Lubricate

Usage:

12M B92
Poznámka Společnost Caterpillar doporučuje používat pro mazání ložisek náklonu kol molybdenové mazivo s 5 % molybdenu. Více informací o mazacím tuku s molybdenem viz Zvláštní publikace, S7BU6250, "Doporučené provozní náplně strojů Caterpillar)".

Ložiska náklonu kol

Před natlačením mazacího tuku do maznic otřete maznice hadrem.



Ilustrace 1g01271922
Kolo je na ilustraci pro názornost sejmuto.

Každé přední kolo má dvě maznice. K promazání ložisek náklonu kol natlačte vhodné mazivo do maznic.

Ložiska tyčí náklonu kol

Před natlačením mazacího tuku do maznic otřete maznice hadrem.



Ilustrace 2g01271900
Kolo je na ilustraci pro názornost sejmuto.

Každé přední kolo má jednu maznici. K promazání ložisek tyčí náklonu kol natlačte vhodné mazivo do maznic.

Ložiska válců náklonu kol

Před natlačením mazacího tuku do maznic otřete maznice hadrem.



Ilustrace 3g01271952
Kolo je na ilustraci pro názornost sejmuto.

Pravé přední kolo má dvě maznice na válci náklonu kola. K promazání ložisek válců náklonu kol natlačte vhodné mazivo do maznic.

Caterpillar Information System:

3500B High Displacement Locomotive Engines Fuel Injector Mechanism
C9.3 Marine Engine Cylinder Head - Remove and Install
PM820, PM822, and PM825 Cold Planer Lifting and Tying Down the Machine - Fixed Conveyor
3600 Distillate Fuel Engines Maintenance Interval Schedule
C9.3 Marine Engine Valve Mechanism Cover - Remove and Install
C9.3 Marine Engine Cylinder Block Cover - Remove and Install
3500 Engines Housing (Front)
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
3406E Engine Cylinder Head - Install
The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269} The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269}
C27 and C32 Engine for MD6250 and MD6310 Drill Coolant Level - Test
XQC1200 and XQC1600 Power Modules Circuit Breaker Panel - Remove and Install
2015/07/07 An Improved Housing for the Throttle Inlet Is Used on Certain G3500 Engines {1071}
3500 Generator Sets with Dynamic Gas Blending Generator Bearing - Inspect
2015/08/14 A New Control Valve Assembly for Fuel Is Used on Certain 3500 Marine Engines {1261}
3500 Generator Sets with Dynamic Gas Blending Generator Bearing - Replace
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Right-Hand Service
C280-08 Tier 4 Engine Exhaust Manifold Shield - Remove and Install
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Combined Circuit Keel Cooling
3516B Generator Set Engines with Dynamic Gas Blending Exhaust System Contains Oil
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Left-Hand Service Oil
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490} Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
3500 Industrial Engines Fuel Injector Mechanism
3512C and 3516C Industrial Engines Engine Oil Filter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.