Electronic Control (Diesel Exhaust Fluid) - Remove and Install
Removal Procedure
- Remove panel (1) .
Show/hide table
Illustration 1 | g03498659 |
- Disconnect harness assemblies (4) .
Show/hide table
Illustration 2 | g03505479 |
- Remove bolts (2) and remove electronic control module (3). There are four bolts in total.
Installation Procedure
- Install electronic control module (3) in the reverse order of removal.
- Tighten harness assemblies (4) to a torque of 6 N·m (53 lb in).
Caterpillar Information System:
C9.3 Marine Engine Engine Oil Cooler - Remove and Install - Combined Circuit Keel Cooling
3516C Marine Engines Pressure Sensor (Exhaust Inlet) - Remove and Install
3516C Marine Engines Temperature Sensor (Exhaust Inlet) - Remove and Install
3516C Marine Engines Temperature Sensor (Exhaust Outlet) - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
C9.3 Marine Engine Engine Oil Cooler - Remove and Install
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
C9.3 Marine Engine Engine Oil Filter Base - Remove and Install - Left-Hand Simplex
Cat® Command For Hauling MID 039 - CID 0838 - FMI 03
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
3516C Marine Engines Diesel Exhaust Fluid Pump - Remove and Install
C9.3 Marine Engine Engine Oil Pump - Remove and Install
3516C Industrial Engine Maintenance Interval Schedule
C9.3 Marine Engine Water Pump - Remove and Install
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
C9.3 Marine Engine Water Pump - Disassemble
C9.3 Marine Engine Water Pump - Assemble
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
C8.7 Marine Engines Expansion Tank
G3606 and G3608 Engines Aftercooler - Remove and Install
XQ400 Power Module Maintenance Interval Schedule