3516C Marine Engines Caterpillar


Temperature Sensor (Exhaust Inlet) - Remove and Install

Usage:

3516C TKG

Removal Procedure

  1. Turn the engine OFF.



    Illustration 1g03587421

  1. Remove bolts (1) and cover (2) .



    Illustration 2g03587422

  1. Disconnect harness assembly (3). Remove cable straps (5). Remove bolt (4) and remove harness assembly (6) from the sensor box.

  1. Remove temperature sensor (7) .

Installation Procedure

  1. Install temperature sensor (7) in the reverse order of removal.

    1. Tighten temperature sensor (7) to a torque of 45 ± 5 N·m (33 ± 7 lb ft).

Caterpillar Information System:

3516C Marine Engines Temperature Sensor (Exhaust Outlet) - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
C9.3 Marine Engine Engine Oil Cooler - Remove and Install
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
C9.3 Marine Engine Engine Oil Filter Base - Remove and Install - Left-Hand Simplex
Cat® Command For Hauling MID 039 - CID 0838 - FMI 03
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
C9.3 Marine Engine Engine Oil Filter Base - Remove and Install - Separate Circuit Keel Cooling Flange Connections - Right-Hand Simplex
C11, C13, C15, and C18 Industrial Engines Shutdown (Ground Level) - Test
C9.3 Marine Auxiliary and Generator Set Engine Fuel Temperature Is High
3516C Marine Engines Pressure Sensor (Exhaust Inlet) - Remove and Install
C9.3 Marine Engine Engine Oil Cooler - Remove and Install - Combined Circuit Keel Cooling
3516C Marine Engines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
3516C Marine Engines Diesel Exhaust Fluid Pump - Remove and Install
C9.3 Marine Engine Engine Oil Pump - Remove and Install
3516C Industrial Engine Maintenance Interval Schedule
C9.3 Marine Engine Water Pump - Remove and Install
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
C9.3 Marine Engine Water Pump - Disassemble
C9.3 Marine Engine Water Pump - Assemble
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.