Temperature Sensor (Exhaust Outlet) - Remove and Install
- Turn the engine OFF.
Show/hide table
Illustration 1 g03559757 - Remove bolts (2) and cover (1).
Show/hide table
Illustration 2 g03560043 - Disconnect harness assembly (6). Remove cable straps (3). Remove bolt (4) and remove harness assembly (5) from the sensor box.
Show/hide table
Illustration 3 g03560056 - Remove temperature sensor (7).
- Install temperature sensor (7) in the reverse order of removal.
- Tighten temperature sensor (7) to a torque of
45 ± 5 N·m (33 ± 7 lb ft) .
- Tighten temperature sensor (7) to a torque of
Caterpillar Information System:
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
C9.3 Marine Engine Engine Oil Cooler - Remove and Install
Cat® Command For Hauling MID 039 - CID 0841 - FMI 03
Cat® Command For Hauling MID 039 - CID 0840 - FMI 03
Cat® Command For Hauling MID 039 - CID 0839 - FMI 03
C9.3 Marine Engine Engine Oil Filter Base - Remove and Install - Left-Hand Simplex
Cat® Command For Hauling MID 039 - CID 0838 - FMI 03
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
C9.3 Marine Engine Engine Oil Filter Base - Remove and Install - Separate Circuit Keel Cooling Flange Connections - Right-Hand Simplex
C11, C13, C15, and C18 Industrial Engines Shutdown (Ground Level) - Test
C9.3 Marine Auxiliary and Generator Set Engine Fuel Temperature Is High
C9.3 Marine Auxiliary and Generator Set Engine Coolant Temperature Is High
3516C Marine Engines Temperature Sensor (Exhaust Inlet) - Remove and Install
3516C Marine Engines Pressure Sensor (Exhaust Inlet) - Remove and Install
C9.3 Marine Engine Engine Oil Cooler - Remove and Install - Combined Circuit Keel Cooling
3516C Marine Engines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
3516C Marine Engines Diesel Exhaust Fluid Pump - Remove and Install
C9.3 Marine Engine Engine Oil Pump - Remove and Install
3516C Industrial Engine Maintenance Interval Schedule
C9.3 Marine Engine Water Pump - Remove and Install
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
C9.3 Marine Engine Water Pump - Disassemble
C9.3 Marine Engine Water Pump - Assemble