2015/05/01 Caterpillar


An Improved Parking Brake Lever Is Now Available For All 914G, 924G, 928G, 930G,938G, IT914G, IT928G, and IT938G Compact And Small Wheel Loaders {4284}

Usage:

IT38G 1CW
Integrated Toolcarrier:
IT14G (S/N: FWL1-UP; 8ZM1-UP; KZN1-UP; 1WN1-UP)
IT28G (S/N: WAC1-UP; 8CR1-UP; 9AR1-UP; DBT1-UP)
IT38GSeries II (S/N: JAN1-UP; CSX1-UP)
IT38G (S/N: 7BS1-UP; 1CW1-UP)
Compact Wheel Loader:
914G (S/N: PDF1-UP; 7ZM1-UP; 9WM1-UP)
914G2 (S/N: KNP1-UP)
IT14G2 (S/N: ERP1-UP)
Wheel Loader:
924G (S/N: DDA1-UP; RBB1-UP; WMB1-UP; AAN1-UP; 9SW1-UP; 3PZ1-UP)
924GZ (S/N: RTA1-UP; AAB1-UP; KTC1-UP; 6YW1-UP; WGX1-UP; DFZ1-UP; 3DZ1-UP)
928G (S/N: GMB1-UP; DJD1-UP; WLG1-UP; 6XR1-UP; 7SR1-UP)
930G (S/N: TWR1-UP; TFW1-UP)
938GSeries II (S/N: RTB1-UP; MSC1-UP; CRD1-UP; PHN1-UP; B9Y1-UP)
938G (S/N: 4YS1-UP; 6WS1-UP; 8RS1-UP; 9HS1-UP)

A new Special Instruction is now available. This Special Instruction provides the necessary steps to Install a new parking break lever.

ReferenceRefer to Special Instruction, SEHS0191, "Procedure to Install Parking Brake Lever That is Now Available For All 914G, 924G, 928G, 930G,938G, IT914G, IT928G, and IT938G Compact And Small Wheel Loaders".

This procedure is adaptable to the machines that are listed above.

The Special Instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).

Caterpillar Information System:

Procedure to Install Parking Brake Lever That is Now Available For All 914G, 924G, 928G, 930G,938G, IT914G, IT928G, and IT938G Compact And Small Wheel Loaders{4284} Procedure to Install Parking Brake Lever That is Now Available For All 914G, 924G, 928G, 930G,938G, IT914G, IT928G, and IT938G Compact And Small Wheel Loaders{4284}
415F2 and 427F2 Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Tilt Cylinder - Remove and Install - Single Tilt
Procedure To Install Cat® 416-2003 Grade and Slope Control Gp On Certain Series F Asphalt Pavers and Series V Asphalt Screeds {7219, 7220, 7620} Procedure To Install Cat® 416-2003 Grade and Slope Control Gp On Certain Series F Asphalt Pavers and Series V Asphalt Screeds {7219, 7220, 7620}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Tilt Cylinder - Remove and Install - Parallel Lift
PM310, PM312, and PM313 Cold Planer Water Spray System - Drain
C175-16 Engine for Off-Highway Truck/Tractors Fuel Injection Lines
2015/04/24 Improved Exhaust Tube Now Used on Track Feller Buncher Engine Hoods {7251}
415F2 Industrial Loader Before Operation
C175-16 Engine for Off-Highway Truck/Tractors Fuel Manifold (Rail)
C175-16 Engine for Off-Highway Truck/Tractors Fuel Manifold (Rail)
C175-16 Engine for Off-Highway Truck/Tractors Fuel Lines
415F2 and 427F2 Backhoe Loaders Engine Supplement Turbocharger - Remove and Install
C175-16 Engine for Off-Highway Truck/Tractors Air Cleaner
16M Series 3 and 18M Series 3 Motor Grader Systems Articulation Cylinder and Mounting
2015/04/28 An Improved Speed Sensor Mounting Group Is Now Used on Certain 424B Backhoe Loaders {5736}
Field Installation Instructions for the 2-bolt to 3-bolt Fan Drive Upgrade on Certain 3500 Machines {1359, 7960} Field Installation Instructions for the 2-bolt to 3-bolt Fan Drive Upgrade on Certain 3500 Machines {1359, 7960}
CW34 Pneumatic Compactor Cooling System Coolant Sample (Level 1) - Obtain
CW34 Pneumatic Compactor Cooling System Coolant Sample (Level 1) - Obtain
CW34 Pneumatic Compactor Cooling System Water Temperature Regulator - Replace
CW34 Pneumatic Compactor Cooling System Water Temperature Regulator - Replace
Bench Test Procedure for 420F2, 426F2, 427F2, 428F2, 430F2, 432F2, 434F2, 440, 444F2, and 450 Backhoe Loader Transmissions {3030, 3073, 3139, 5051} Bench Test Procedure for 420F2, 426F2, 427F2, 428F2, 430F2, 432F2, 434F2, 440, 444F2, and 450 Backhoe Loader Transmissions {3030, 3073, 3139, 5051}
Procedure to Install Conveyor and Auger Sonic Sensors on AP255E, Paver {1408, 5657} Procedure to Install Conveyor and Auger Sonic Sensors on AP255E, Paver {1408, 5657}
2015/05/15 Sonic Sensor Kits Are Now Available on AP255E Asphalt Paver for the Conveyor and Auger {1408, 5657}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.