Piston Pump (Pilot, Brake) - Remove and Install
Start By:
- Remove the cab.
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
Show/hide table
Personal injury can result from hot oil spray and raised work tools. Make sure all the work tools have been lowered, the oil is cool and the pressure has been released from the hydraulic system before removing any components or lines. Do not allow hot oil or components to contact skin. |
- Remove clips (1).
- Remove cable straps (2).
- Disconnect hose assemblies (2), hose assemblies (4), and hose assemblies (5). Move all disconnected hose assemblies out of the way.
Show/hide table
Illustration 2 g03816296 - Disconnect hose assemblies (6).
- Remove clips (7).
- Disconnect hose assembly (8) and hose assemblies (9). Move all disconnected hose assemblies out of the way.
Show/hide table
Illustration 3 g03816298 - Disconnect hose assembly (10).
Show/hide table
Illustration 4 g03816299 Typical Example - Remove guard assembly (11).
Show/hide table
Illustration 5 g03816300 - Disconnect hose assembly (12) and hose assemblies (13) from the bottom of the pump stack.
Show/hide table
Illustration 6 g03816301 - Attach a suitable lifting device to pump stack (14). The weight of pump stack (14) is approximately
82 kg (181 lb) .Show/hide tableIllustration 7 g03816302 Viewed from the bottom of the pump stack. - Remove bolt (15) and the washer.
Show/hide table
Illustration 8 g03816303 - Remove bolt (16) and the washer. Use the suitable lifting device in order to remove pump stack (14) and the O-ring seal
Show/hide table
Illustration 9 g03816304 - Position pump stack (14) onto suitable cribbing. Attach a suitable lifting device to steering piston pump (17). The weight of steering piston pump (17) is approximately
34 kg (75 lb) . Remove bolts (18) and the washers. Remove bolts (19) and the washers. Use the suitable lifting device in order to separate steering piston pump (17) from pump stack (14) and remove the O-ring seal. Remove piston pump (20).
Show/hide table
Illustration 1 | g03816294 |
- Install piston pump (20) in the reverse order of removal.
Caterpillar Information System:
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Operator Platform - Remove and Install
SE60 V Asphalt Screed Machine System Screed Components
CP54B, CP56B, CP68B, CP74B, CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Electronic Control System Solenoid Valve - Test
CP54B, CP56B, CP68B, CP74B, CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B and CS78B Vibratory Soil Compactors Machine Electronic Control System Switch Circuits - Test
CP34 and CS34 Vibratory Soil Compactors Propel System Hydraulic Schematic (Propel System)
CP34 and CS34 Vibratory Soil Compactors Propel System Electrical Schematic (Propel System)
558 Forest Machine Plate Locations and Film Locations
2015/04/01 A New Joystick Control Group Is Now Used on Certain Track Feller Bunchers. {5063, 5570, 5705}
Transmission Bypass Indicator Failure on 730C and 730C Ejector Articulated Trucks{3004, 3067} Transmission Bypass Indicator Failure on 730C and 730C Ejector Articulated Trucks{3004, 3067}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Piston Pump (Pilot, Brake) - Assemble
SE60 V Asphalt Screed Machine System Electronic Control Module (Screed)
Installation of the 470-0417 Hydraulic Blade Lift Gp on Certain Motor Graders{6050, 6159, 6701} Installation of the 470-0417 Hydraulic Blade Lift Gp on Certain Motor Graders{6050, 6159, 6701}
RM500B Reclaimer Mixer Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
RM500B Reclaimer Mixer Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
RM500B Reclaimer Mixer Engine Supplement Nozzle Heater Harness - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Pilot Valve (Steering) - Remove and Install
RM500B Reclaimer Mixer Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install
RM500B Reclaimer Mixer Engine Supplement Ignition Coil (ARD) - Remove and Install
RM500B Reclaimer Mixer Engine Supplement Fuel Manifold (ARD) - Remove and Install
2015/03/26 Retaining the Engine Configuration Data when Installing New Engine Software on C3.4B Machine Engines {1920}
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Maintenance Interval Schedule
SE60 V Asphalt Screed Machine System Screed Plate
SE60 V Asphalt Screed Machine System Screed Plate
SE60 V Asphalt Screed Machine System Screed Plate