Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052} Caterpillar


Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052}

Usage:

3616 1FN
Engine: All 3600 Engines All C280 Engines

Introduction

The problem that is listed below does not have a known permanent solution. Until a permanent solution is known, use the solution that is stated below.

Problem

The turbine blades inside of the VTC254 turbocharger may shift due to the improper seating of the locking plate.

Solution




Illustration 1g03784098

Example of a shifted turbine blade

Turbochargers with the serial numbers listed above will need to be inspected for shifted blades. If a turbocharger has one of these serial numbers, submit a Dealer Solutions Network (DSN) inquiry for further assistance. Provide the following information below in the DSN ticket.

  • Application

  • Location

  • Part Number

  • Serial number of turbocharger

Table 1
Turbocharger Serial Numbers    
S/N:HT541790-41793    
S/N:HT541851-41852    
S/N:HT541863-41864    
S/N:HT541894    
S/N:HT541921-41923    
S/N:HT541931    
S/N:HT542311    
S/N:HT542382    
S/N:HT542494-42495    
S/N:HT542541    
S/N:HT542636    
S/N:HT542802-42803    
S/N:HT542977    
S/N:HT543014    
S/N:HT543018    
S/N:HT543061    
S/N:HT543105    
S/N:HT543143-43144    
S/N:HT543172-43173    
S/N:HT543217-43218    
S/N:HT543243-43244    
S/N:HT543247    
S/N:HT543280-43284    
S/N:HT543320    
S/N:HT543418    
S/N:HT543513    
S/N:HT543649-43650    
S/N:HT543667    
S/N:HT543751    
S/N:HT543759    
S/N:HT544040    
S/N:HT544047    
S/N:HT544364-44365    
S/N:HT544533    
S/N:HT544875    
S/N:HT544960-44961    
S/N:HT545124    
S/N:HT545141    
S/N:HT545151-45152    
S/N:HT545561    
S/N:HT545576    
S/N:HT545638-45640    
S/N:HT545790    
S/N:HT545840    
S/N:HT545857    
S/N:HT545860    
S/N:HT545892    
S/N:HT545922    
S/N:HT545957-45958    
S/N:HT546040-46041    
S/N:HT546112    
S/N:HT546115    
S/N:HT546172    
S/N:HT546304    
S/N:HT546333-46334    
S/N:HT546391-46392    
S/N:HT546400-46401    
S/N:HT546497-46498    
S/N:HT546539-46540    
S/N:HT546592-46594    
S/N:HT546685    
S/N:HT546827-46829    
S/N:HT547358-47359    
S/N:HT547637-47638    
S/N:HT547820    
S/N:HT547832    
S/N:HT548308    
S/N:HT548321    
S/N:HT548451-48452    
S/N:HT548518-48519    
S/N:HT548535-48536    
S/N:HT548556-48557    
S/N:HT548589-48590    
S/N:HT548726-48728    
S/N:HT548904-48906    
S/N:HT548968-48969    
S/N:HT549317-49318    

Caterpillar Information System:

C13 Generator Set Engine Temperature Sensor (Catalyst Inlet) - Remove and Install
Final Drive Motor Housings Are Available for Certain Excavators {4050} Final Drive Motor Housings Are Available for Certain Excavators {4050}
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is Low
C13 Generator Set Engine Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C280 Marine Engines Fuel Pressure Is High
C13 Generator Set Engine Pressure Sensor (ARD Combustion Air) - Remove and Install
C4.4 and C6.6 Engines Crankcase Breather Ejects Oil
Procedure for Installing Three Phase Flywheel Inverter On Certain Uninterruptible Power Supply{4480} Procedure for Installing Three Phase Flywheel Inverter On Certain Uninterruptible Power Supply{4480}
C13 Generator Set Engine Fuel Temperature Sensor - Remove and Install
C13 Generator Set Engine Fuel Pressure Sensor - Remove and Install
C13 Generator Set Engine Crankcase Pressure Sensor - Remove and Install
C13 Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
C13 Generator Set Engine Pressure Sensor (DPF) - Remove and Install
C13 Generator Set Engine Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C2.2 Engines for Caterpillar Built Machines Crankshaft
C13 Generator Set Engine Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Generator Set Engine Pressure Sensor (NRS Differential) - Remove and Install
C13 Generator Set Engine Pressure Sensor (NRS Absolute) - Remove and Install
2015/05/15 A New Starter Is Now Available for Certain Cat® Generator Set Engines {1453}
C13 Generator Set Engine Boost Pressure Sensor - Remove and Install
C13 Generator Set Engine Inlet Air Temperature Sensor - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Component Location
C13 Generator Set Engine Venturi Tube - Remove and Install
C7.1 Engines Aftertreatment Identification Module - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.