Final Drive Motor Housings Are Available for Certain Excavators {4050}
- Excavator
- All
The final drive motor housings listed below are currently available for field service. The final drive housing can be selected to fit the job site condition based on a need for the open protected labyrinth (OPL). Table 1 provides the parts list for 300 Series Excavators.
Show/hide table
Parts List | |||
---|---|---|---|
Sales Model | Full OPL(1) | Partial OPL(2) | Non-OPL(3) |
319-323 | |||
324-330 | N/A | ||
336/340 | |||
349/352 | N/A | ||
374 | N/A | ||
390 | N/A | N/A | |
Show/hide table
(1) | Recommended for muddy applications |
(2) | Recommended for a combination of muddy and abrasive applications |
(3) | Recommended for abrasive applications |
Caterpillar Information System:
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is Low
C13 Generator Set Engine Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C280 Marine Engines Fuel Pressure Is High
C13 Generator Set Engine Pressure Sensor (ARD Combustion Air) - Remove and Install
C4.4 and C6.6 Engines Crankcase Breather Ejects Oil
Procedure for Installing Three Phase Flywheel Inverter On Certain Uninterruptible Power Supply{4480} Procedure for Installing Three Phase Flywheel Inverter On Certain Uninterruptible Power Supply{4480}
C13 Generator Set Engine Fuel Temperature Sensor - Remove and Install
C13 Generator Set Engine Fuel Pressure Sensor - Remove and Install
C13 Generator Set Engine Crankcase Pressure Sensor - Remove and Install
C13 Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
3512E Engines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
2015/01/23 New Varistor is Now Available for Certain Engines and Generator Sets {4450}
C13 Generator Set Engine Temperature Sensor (Catalyst Inlet) - Remove and Install
Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052} Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052}
C13 Generator Set Engine Pressure Sensor (DPF) - Remove and Install
C13 Generator Set Engine Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C2.2 Engines for Caterpillar Built Machines Crankshaft
C13 Generator Set Engine Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Generator Set Engine Pressure Sensor (NRS Differential) - Remove and Install
C13 Generator Set Engine Pressure Sensor (NRS Absolute) - Remove and Install
2015/05/15 A New Starter Is Now Available for Certain Cat® Generator Set Engines {1453}
C13 Generator Set Engine Boost Pressure Sensor - Remove and Install
C13 Generator Set Engine Inlet Air Temperature Sensor - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Component Location