826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Caterpillar


Brake Control Valve (Parking) - Remove and Install

Usage:

826K 232

Removal Procedure

Start By:

  1. Connect the steering frame lock.

  2. Release the hydraulic system pressure.


    Illustration 1g03730507

  1. Use two people in order to remove guard (2). The weight of guard (2) is approximately 23 kg (51 lb).

  2. Use two people in order to remove guard (1). The weight of guard (1) is approximately 24 kg (53 lb).


    Illustration 2g03730729

  3. Disconnect hose assembly (4).

  4. Disconnect harness assemblies (6).

  5. Disconnect tube assemblies (3).

  6. Remove bolts (5) and the washers. Remove parking brake control valve (7).

Installation Procedure

  1. Install parking brake control valve (7) in the reverse order of removal.

Caterpillar Information System:

C3.4B Engines Relay - Test - Start Relay
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317} Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
2014/10/01 An Improved Air Lines Group Is Now Available on Certain 14M Motor Graders {1071}
2014/10/15 Improved Lubrication Lines Group Is Now Used on 14M Motor Graders {7510}
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Rated Load
2014/09/29 New Front Bucket Clam Is Now Used on E and F Series Backhoe Loaders {6104}
SE50 VT Asphalt Screed Height Adjuster (End Gate) - Manual
SE50 VT Asphalt Screed Heater (End Gate)
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Hydraulic Cylinder (End Gate)
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Heater (End Gate)
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Specifications
725C2 and 730C2 Articulated Truck Machine System Front Frame and Rear Frame - Separate
785G Off-Highway Truck Systems Brake Valve (Front Service Brake)
AP655F and AP655F L Asphalt Paver Machine Systems Screed Frame
785G Off-Highway Truck Systems Final Drive, Brake, and Wheel
PL83 and PL87 Pipelayers Air Conditioner Condenser - Clean - If Equipped
785G Off-Highway Truck Systems Brake Valve (Front Service Brake)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Bulldozer Stabilizer - Remove and Install
785G Off-Highway Truck Systems Brake Valve (Rear Service Brake)
Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329} Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329}
2014/09/29 The Multipurpose Bucket Cylinder Has Been Improved for Certain F Series Backhoe Loaders {5457, 6104}
PL83 and PL87 Pipelayers Engine Oil Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.