826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Caterpillar


Brake Control Valve (Service) - Remove and Install

Usage:

826K 232

Removal Procedure

Start By:

  1. Connect the steering frame lock.

  2. Release the hydraulic system pressure.


    Illustration 1g03730507

  1. Use two people in order to remove guard (2). The weight of guard (2) is approximately 23 kg (51 lb).

  2. Use two people in order to remove guard (1). The weight of guard (1) is approximately 24 kg (53 lb).


    Illustration 2g03730517

  3. Disconnect fitting (5) and fitting (7).

  4. Disconnect hose assembly (6).

  5. Remove nuts (3) and the washers. Remove service brake control valve (4).

Installation Procedure

  1. Install service brake control valve (4) in the reverse order of removal.

Caterpillar Information System:

950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Implement Cycle Time - Check
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Service) - Remove and Install
C7 and C9 Industrial Engines Injection Actuation Pressure - Test
785G Off-Highway Truck Systems Final Drive
M318F, M320F and M322F Wheeled Excavators Hydraulic System Travel Valve Air - Purge
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Service) - Remove and Install
785G Off-Highway Truck Systems Brake Valve (Parking) - If Equipped
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System Bank Valve (Backhoe) - Pilot Operated
C7 and C9 Industrial Engines Indicator Lamp - Test
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Relief Valve - Test and Adjust - Steering Cylinder Work Port
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Assemble
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201} Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
2014/09/26 New Engine Software Is Used on Certain 14M and 16M Motor Graders {1920}
2014/10/13 Alternative Speed Sensor Orientation Is Used On Certain Off-Highway Trucks {3175}
725C Articulated Truck Tailgate (Scissors) - Remove and Install
QUICK COUPLERS Coupler Cylinder
SE50 VT Asphalt Screed Screed Control and Mounting
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Height Adjuster (End Gate) - Hydraulic
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Heater (End Gate)
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Hydraulic Cylinder (End Gate)
SE50 VT Asphalt Screed Heater (End Gate)
SE50 VT Asphalt Screed Height Adjuster (End Gate) - Manual
2014/09/29 New Front Bucket Clam Is Now Used on E and F Series Backhoe Loaders {6104}
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Rated Load
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.